JVC AA-V90EK instruction manual Charging the Battery Pack, Attach, Detach, Confirm Status

Page 1

LYT0002-0V7A

AC POWER ADAPTER/CHARGER INSTRUCTIONS

AA-V90EK

CHARGING THE BATTERY PACK

You can charge one battery pack at a time, or two consecutively.

Thank you for purchasing the JVC AC Power Adapter/ Charger. This unit provides DC power for the JVC Digital Video Camera from a household AC outlet. It can be used to recharge the JVC battery pack for exclusive use with the JVC Digital Video Camera, and is capable of charging two battery packs consecutively. To avoid problems and obtain the best results, please read this instruction booklet carefully before use. Before using as a power adapter, make sure that this unit's model number is the same as that of the power supply unit specified in the instruction manual of the equipment you wish to power.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit should be used with AC 110 – 240 V`, 50/60 Hz only.

CAUTION:

To prevent electric shocks and fire hazards, do NOT use any other power source.

CAUTION:

ATTACH

ToAC outlet

Battery pack

BN-V907U

Power cord

DETACH

IMPORTANT

Connection to the mains supply in the United Kingdom.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover.

To prevent electric shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified service personnel.

NOTE:

The rating plate (Serial number plate) is on the bottom of the unit.

As a AC Power Adapter/Charger, the AA-V90EK is used exclusively with the JVC Digital Video Camera.

Charger

 

indicator 1

 

 

AC Power

Power lamp

Adapter/Charger

Charger

DC jack

indicator 2

 

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded E or Green. The wires in the mains lead are coloured in accordance with the following code:

Blue to N (Neutral) or Black

Brown to L (Live) or Red

If these colours do not correspond with the terminal identifications of your plug, connect as follows:

Blue wire to terminal coded N (Neutral) or coloured black.

Brown wire to terminal coded L (Live) or coloured Red.

If in doubt — consult a competent electrician.

CAUTION:

When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

CAUTIONS:

•If used near a radio, this unit may interfere with reception.

•Prevent inflammables, water and metallic objects from entering the unit.

•Do not disassemble or modify the unit. •Do not apply shocks to the unit.

•Do not subject the unit to direct sunlight. •Avoid using the unit in extremely hot or humid

places.

•Avoid using the unit in places subject to vibrations.

A WORD ON THE EXCLUSIVE BATTERY PACKS, BN-V907U

The battery packs are lithium-ion.

Give attention to the following to make the most of their characteristics.

For charging: 10°C to 35°C

For operating: 0°C to 40°C

For storing: –10°C to 30°C

1 SUPPLY POWER TO CHARGER Plug the AC Adapter/Charger's power cord into an AC outlet. The power indicator comes on.

2 ATTACH BATTERY/BATTERIES Remove the battery pack’s protective cap and

attach while making sure the marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger.

The Charge Indicator (1 or 2) begins blinking to indicate charging has started.

3 CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

If two batteries are attached to the charger, they will be charged in the order that they were attached.

4 DETACH BATTERY/BATTERIES

Slide the battery or batteries in the direction of the arrow and lift off.

•Remember to unplug the AC Adapter/ Charger's power cord from an AC outlet.

NOTE:

Perform charging where the temperature is between 10° and 35°C. (20°–25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.

Image 1
Contents Detach BATTERY/BATTERIES Charging the Battery PackAttach DetachSupplying Power Battery Pack Charging TimeSpecifications During USE