Problems and Solutions

Problem	Possible Cause	Solution
No status light	No power	Make sure power flow to the wall outlet
	to charger	is “ON”.
	Loose connections	Check connections of all plugs. Make
		sure the battery connectors are tightly
		plugged into the charger connectors
		and the power cord connector is tightly
		plugged into both the charger and the
		wall outlet.
	Bad charger	There is no sure way to tell if your
		charger is working unless you have a
		volt meter. If you suspect there is a
		problem with your charger, contact
		Power Wheels® Consumer Relations.
	Wrong batteries	This charger is intended for use only
		with a Power Wheels® 12-volt system
		with two 6-volt lead acid batteries.
Flashing red	Loose connections	Check connections of all plugs. Make
status light		sure the battery connectors are tightly
		plugged into the charger connectors
		and the power cord connector is tightly
		plugged into both the charger and the
		wall outlet.
	Undercharged	Batteries need a 100% (solid green)
	batteries	charge every other use.
	Batteries dead	Replace the batteries with a new,
		Power Wheels® 12-volt system with
		two 6-volt lead acid batteries.
Solid red	Undercharged	Charge batteries 100% (solid green) or
status light	batteries	Ready for Use (flashing green).