Festool PN561593, PM561593 Connecting the Plug-It Power Cord, Installing the Splinter Guard

Page 12

Connecting the Plug-It Power Cord

The corded Carvex jigsaws (PS 420 EBQ and PSB 420 EBQ) come equipped with a removable Plug-It power cord. The cord can be removed for easier storage of the tool. The Plug-It port on the PS 420 EBQ model can also be rotated when used inverted under a workpiece, or for fitting in tighter corners.

To install the power cord, insert the cord into the inlet (port) on the tool with the key and keyway aligned, and twist the locking ring ¼-turn until it clicks. Reverse the procedure to remove the cord.

NOTICE: Make sure to fully tighten the plug-it cord a full quarter-turn until it clicks. If the plug is not fully locked, the socket and cord can overheat and be damaged.

NOTE: The 18 gauge plug-it cord is interchangeable with other tools that use the same size cord, but it cannot be used with larger tools, such as routers and saws. The plug has an extra key to prevent it from being used on a larger tool that would otherwise damage the cord. Larger cords may be used with smaller tools, but not the reverse.

Key &

Lock Keyway

Unlock

 

 

 

Locking

 

 

Ring

Plug-It

Cord

Plug-It

Port

Port rotates on

PS 420 EBQ

model.

Installing the Splinter Guard

The clear plastic splinter guard serves as a zero-clearance throat along the blade to reduce splintering of the topside of the workpiece. The splinter guard is a consumable com- ponent that is replaced when it wears or when blades of different thicknesses are used.

WARNING! This procedure requires the saw to be powered and in operation during a portion of the installation procedure. Care must be taken to pre- vent personal injury. Remove the battery or unplug the saw when instructed to do so.

1.Unplug the saw or remove the battery to prevent accidental starting.

2.Rotate the pendulum stroke lever to the zero position.

3.Slide the plastic splinter guard onto the ribs on the main base, but not far enough to touch the blade.

4.Turn the saw on, and press the front of the splinter guard against a table to allow the sawblade to cut into the splinter guard as it slides the rest of the way on the base.

5.For added life, as the splinter guard wears, you can push it farther back into the base until the gap is gone.

Ribs

Grooves

Gap

12

Carvex PS420 Series

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Carvex PS420 Series Pendulum Jigsaws Limited Warranty1 Contents About This ManualGeneral Power Tool Safety Warnings Save all warnings and instructions for future referenceSpecific Safety Rules for Reciprocating Saws Specific Safety Rules for Battery Powered ToolsRespiratory Exposure Safety Warnings ServiceFunctional Description Psbc 420 EBTechnical Specifications Intended UseJigsaws Batteries and ChargerSetup Adjusting the Blade GuideGuide Jaws Adjustment Screw Mm Hex Key Changing the SawbladeInstalling/Removing the Dust Collection Port Changing Base InsertsBase Insert Release Tab Release Tab Dust PortSetting the Pendulum Stroke Changing the Main BaseBase Release Lever open Clamp Pendulum Motion Guide Roller GapInstalling/Removing the Battery Charging BatteryBattery Slot Status Light Release ButtonConnecting the Plug-It Power Cord Installing the Splinter GuardRibs Grooves Gap Setting the Variable Speed Right Power SwitchTrigger Release Variable Left Power Switch Turning on the SawSawblade Selection Blade UsageBlade Length Tooth TypeUsing Dust Extraction Using the Jigsaw with a Guide RailOperation Using the Trammel to Cut Circles Underside JigsawDown Bevel Feet Adjustment Knob Indicator Lines PointerMaking Bevel Cuts Maintenance and Adjustment Routine MaintenanceAdjustments Keep the Saw CleanTroubleshooting Symptom Possible CausesFestool USA

PD561608, PN561593, PI561608, PN561608, PI561668 specifications

Festool, a leading name in professional power tools, continually introduces revolutionary products that enhance productivity and precision in woodworking and construction. Among their innovative offerings are the Festool PM561608, PI561593, PI561677, PM561593, and PD561593 tools. Each of these models embodies the quality and performance Festool is renowned for, catering to the needs of professionals and hobbyists alike.

The Festool PM561608 is designed for precise edge banding application, making it ideal for cabinet makers and joiners. One of its standout features is the ability to apply edges with varied thicknesses, allowing for versatile usage. The tool's compact and lightweight design ensures ease of handling, while its robust construction guarantees long-term durability and consistent performance even in demanding environments. The adjustable pressure and speed settings offer control, enabling users to achieve smooth, professional-grade edges.

Next, the Festool PI561593 presents a perfect integration of practicality and cutting-edge technology. This model features an innovative quick-clamping mechanism that allows for fast and efficient setup, eliminating downtime during critical projects. Additionally, it offers an integrated dust extraction system that not only enhances visibility but also contributes to a healthier workspace by reducing airborne particles.

The Festool PI561677 brings precision to the forefront of cutting tasks. Its ergonomic design provides comfort during prolonged use, while its high-performance motor ensures efficient cutting through various materials. Equipped with the latest blade technology, this tool delivers clean, splinter-free cuts, making it a favorite among craftsmen who prioritize quality.

For those seeking versatility, the Festool PM561593 is a multi-functional tool that bridges several uses in one compact device. With interchangeable attachments, it can perform a range of tasks from sanding to cutting, reducing the need for multiple tools. Its superior dust extraction capabilities mean less clean-up time and a safer workstation.

Finally, the PD561593 embodies Festool's commitment to innovative design, featuring advanced safety mechanisms that ensure user protection during operation. Its lightweight construction and ergonomic grip minimize strain, allowing users to work comfortably for extended periods.

In summary, the Festool PM561608, PI561593, PI561677, PM561593, and PD561593 tools reflect the brand's dedication to quality, efficiency, and user-friendly design. Ideal for professionals seeking reliable and high-performance equipment, these tools are essential additions to any woodworking arsenal. Each model offers a set of features tailored to enhance productivity while ensuring safety and comfort in every task.
Top Page Image Contents