Festool PN561608 Maintenance and Adjustment, Routine Maintenance, Adjustments, Keep the Saw Clean

Page 18

Maintenance and Adjustment

WARNING! Any maintenance or repair work that requires opening of the motor or gear hous- ing should be carried out only by an authorized Customer Service Center (see your dealer for information on locating a service center).

WARNING! To reduce the risk of electrocution or other personal injury, always unplug the tool from the power supply outlet or remove the battery before performing any maintenance or repair work on the tool.

NOTICE: Do not use compressed air to clean the motor housing of the tool, as you could inject for- eign objects into the motor through the ventilation openings.

NOTICE: Certain cleaning agents and solvents are harmful to plastic parts. Some of these include, but are not limited to: Gasoline, Acetone, Methyl Ethyl Ketone (MEK), Carbonyl Chloride, cleaning solutions containing Chlorine, Ammonia, and household clean- ers containing Ammonia.

Routine Maintenance

Keep the Saw Clean

Dust and debris from some materials can be extremely abrasive and cause components within the saw to wear prematurely. It is important to keep moving parts cleared of abrasive dusts.

►► As a general rule, keep the saw clean of all dust and debris. Even soft-wood dust can be abrasive over time.

►► Examine all moving parts for dust and debris.

►► Keep the blade area and dust extraction port clean of debris. Debris can cause wear and reduce the effective- ness of the dust extraction system.

Adjustments

Programming the LED light Function

WARNING! The stroboscopic function of the LED light may make it difficult to determine the blade position, or give the appearance that the blade is not moving.

WARNING! Never look directly into the LED lights. The lights are very bright and may damage your vision.

The LED work lights have 3 programmable settings. These are stroboscopic, steady-on, and off. To reduce the likeli- hood of the bright LED lights from shining in the operator’s eyes, the lights will automatically turn off any time the saw is rotated slightly past vertical toward the upside down posi- tion. These three operating modes are described below:

Stroboscopic: The stroboscopic function means that the LEDs will operate in unison with the speed of the sawblade stroke. This synchronous operation will make the sawblade appear stationary, instead of a blur of motion. The purpose of this stopped-motion appearance is to make it easier to follow a pencil line.

The stroboscopic effect is active only when the blade speed is above approximately 2100 strokes per minute. This means the frequency range of the light is 35 to 63 Hertz.

Steady-On:In the steady-on mode, the LED lights will be active and steady-on anytime the saw is operating, except when the saw is turned upside down.

Off: In this mode, the LED lights are disabled.

WARNING! Do not perform this adjustment with a sawblade installed in the jigsaw. This adjustment may result in the saw starting unexpectedly.

1.Remove the sawblade from the saw as described on page 8.

2.Hold the saw in such a manner that when the LED lights turn on, they will not shine directly into your eyes.

3.Simultaneously press and hold both left and right barrel power switches until the saw beeps.

►► If the saw turns on, turn it back off and try again. The saw may turn on if both switches are not pressed simultaneously.

►► It will take approximately 10 seconds for the saw to beep from the time you first pressed the two switches.

►► The LED lights may or may not come on after the saw beeps, depending on the previous program mode.

4.When the saw beeps, release both power switches.

5.Press and release the right-hand power switch to cycle through the 3 programming options.

►► The LED lights will indicate the current program mode. They will flash if in stroboscopic mode. They will be steady-on for steady-on mode. They will be off for the off-mode.

6.When the desired program mode is selected, Pres and release the left-hand power switch to exit program-mode.

Left Power

 

Right Power

Switch

 

Switch

18

Carvex PS420 Series

Image 18
Contents Carvex PS420 Series Pendulum Jigsaws Limited Warranty1 Contents About This ManualGeneral Power Tool Safety Warnings Save all warnings and instructions for future referenceRespiratory Exposure Safety Warnings Specific Safety Rules for Reciprocating SawsSpecific Safety Rules for Battery Powered Tools ServiceFunctional Description Psbc 420 EBJigsaws Technical SpecificationsIntended Use Batteries and ChargerGuide Jaws Adjustment Screw Mm Hex Key SetupAdjusting the Blade Guide Changing the SawbladeBase Insert Release Tab Installing/Removing the Dust Collection PortChanging Base Inserts Release Tab Dust PortBase Release Lever open Clamp Setting the Pendulum StrokeChanging the Main Base Pendulum Motion Guide Roller GapBattery Slot Status Light Installing/Removing the BatteryCharging Battery Release ButtonConnecting the Plug-It Power Cord Installing the Splinter GuardRibs Grooves Gap Trigger Release Variable Left Power Switch Setting the Variable SpeedRight Power Switch Turning on the SawBlade Length Sawblade SelectionBlade Usage Tooth TypeUsing Dust Extraction Using the Jigsaw with a Guide RailOperation Using the Trammel to Cut Circles Underside JigsawDown Bevel Feet Adjustment Knob Indicator Lines PointerMaking Bevel Cuts Adjustments Maintenance and AdjustmentRoutine Maintenance Keep the Saw CleanTroubleshooting Symptom Possible CausesFestool USA

PD561608, PN561593, PI561608, PN561608, PI561668 specifications

Festool, a leading name in professional power tools, continually introduces revolutionary products that enhance productivity and precision in woodworking and construction. Among their innovative offerings are the Festool PM561608, PI561593, PI561677, PM561593, and PD561593 tools. Each of these models embodies the quality and performance Festool is renowned for, catering to the needs of professionals and hobbyists alike.

The Festool PM561608 is designed for precise edge banding application, making it ideal for cabinet makers and joiners. One of its standout features is the ability to apply edges with varied thicknesses, allowing for versatile usage. The tool's compact and lightweight design ensures ease of handling, while its robust construction guarantees long-term durability and consistent performance even in demanding environments. The adjustable pressure and speed settings offer control, enabling users to achieve smooth, professional-grade edges.

Next, the Festool PI561593 presents a perfect integration of practicality and cutting-edge technology. This model features an innovative quick-clamping mechanism that allows for fast and efficient setup, eliminating downtime during critical projects. Additionally, it offers an integrated dust extraction system that not only enhances visibility but also contributes to a healthier workspace by reducing airborne particles.

The Festool PI561677 brings precision to the forefront of cutting tasks. Its ergonomic design provides comfort during prolonged use, while its high-performance motor ensures efficient cutting through various materials. Equipped with the latest blade technology, this tool delivers clean, splinter-free cuts, making it a favorite among craftsmen who prioritize quality.

For those seeking versatility, the Festool PM561593 is a multi-functional tool that bridges several uses in one compact device. With interchangeable attachments, it can perform a range of tasks from sanding to cutting, reducing the need for multiple tools. Its superior dust extraction capabilities mean less clean-up time and a safer workstation.

Finally, the PD561593 embodies Festool's commitment to innovative design, featuring advanced safety mechanisms that ensure user protection during operation. Its lightweight construction and ergonomic grip minimize strain, allowing users to work comfortably for extended periods.

In summary, the Festool PM561608, PI561593, PI561677, PM561593, and PD561593 tools reflect the brand's dedication to quality, efficiency, and user-friendly design. Ideal for professionals seeking reliable and high-performance equipment, these tools are essential additions to any woodworking arsenal. Each model offers a set of features tailored to enhance productivity while ensuring safety and comfort in every task.