BP130
Ni-MH Rechargeable Battery Pack
Instruction Sheet
This Rechargeable Battery Pack is designed for use with the Fluke ScopeMeter Model 124 and with Model 123 if the installed software is of version V2.00 or higher.
Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack.
After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off.
•Nominal Voltage: 4.8 V
•Capacity: 3.0 Ah
•Lifetime: minimum 500 cycles at nominal charge of 500 mA
•Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage:
Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery: Fully charge before use.
Keep the battery cool
Do not dispose in open fire Observe polarity
Do not solder directly to the cells Do not short circuit
Store Batteries outside the Instrument
BP130
Ni-MH Rechargeable Battery Pack
Instruction Sheet
This Rechargeable Battery Pack is designed for use with the Fluke ScopeMeter Model 124 and with Model 123 if the installed software is of version V2.00 or higher.
Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack.
After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off.
•Nominal Voltage: 4.8 V
•Capacity: 3.0 Ah
•Lifetime: minimum 500 cycles at nominal charge of 500 mA
•Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage:
Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery: Fully charge before use.
Keep the battery cool
Do not dispose in open fire Observe polarity
Do not solder directly to the cells Do not short circuit
Store Batteries outside the Instrument
BP130
Instruction Sheet
This Rechargeable Battery Pack is designed for use with the Fluke ScopeMeter Model 124 and with Model 123 if the installed software is of version V2.00 or higher.
Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack.
After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off.
•Nominal Voltage: 4.8 V
•Capacity: 3.0 Ah
•Lifetime: minimum 500 cycles at nominal charge of 500 mA
•Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage:
Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery: Fully charge before use.
Keep the battery cool
Do not dispose in open fire Observe polarity
Do not solder directly to the cells Do not short circuit
Store Batteries outside the Instrument