Bryant OM11-19 manual To Light Unit

Page 1

user’s information manual

SINGLE PACKAGE ROOFTOP

581B

DuraPac Plus Series

GAS HEATING/

Sizes 036-150

ELECTRIC COOLING UNITS

3 to 121/2 Tons

NOTE TO INSTALLER:

This manual should be left with the equipment owner.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas sup- plier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

WARNING: Improper installation, adjustment, alteration, service, or maintenance could cause prop- erty damage, serious injury or death. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.

WARNING: Before performing recommended maintenance, be sure main power switch to unit is turned off. Electrical shock could cause serious injury or death.

Your rooftop combination heating/cooling unit is equipped with an automatic direct-spark ignition and induced-draft combustion blower.

WARNING: Do not attempt to light by hand; seri- ous injury or death may result.

Cancels: OM11-19

OM11-22

 

3/15/02

TO LIGHT UNIT

WARNING:

1.Do not attempt to light by hand; personal injury may result.

2.Before attempting to start the gas heating sec- tion, familiarize yourself with all the proce- dures that must be followed.

If you do not follow these instructions exactly, a fire or explosion may result. Property damage, injury, or loss of life could occur.

See Fig. 1 for location of gas valve. Refer to Fig. 2 while proceeding through the following steps.

I. Step 1

Set room thermostat to the lowest temperature setting and set SYSTEM switch to HEAT or AUTO. position.

II. Step 2

Close the manual gas valve.

III. Step 3

Turn off the electrical supply to the unit and install lockout tag.

IV. Step 4

Remove the burner access panel.

V. Step 5

Move the control on the gas valve to the OFF position and wait 5 minutes.

VI. Step 6

Move control on gas valve to ON position.

Fig. 1 — Typical Gas Valve Location

(581B090 Shown)

Page 1 Page 2
Image 1
Page 1 Page 2
Contents To Light Unit To Light Unit To Shut Unit OFF Routine Maintenance and Care For the Equipment OwnerMaintaining Your Unit AIR FiltersMain II. Heat Exchanger VIII. Electrical Controls and WiringIII. FANS, BELTS, and FAN Motor IV. Evaporator and Condenser CoilsXI. Unit Panels Regular Dealer MaintenanceCase of Trouble Bryant Heating & Cooling Systems For Service or REPAIR, Follow These Steps in Order

OM11-19 specifications

The Bryant OM11-19 is an innovative piece of equipment designed for optimal performance and efficiency in various applications. Known for its reliability and advanced features, the OM11-19 stands out in the market.

One of the main features of the Bryant OM11-19 is its robust design. The construction is engineered to endure harsh conditions, making it suitable for both indoor and outdoor use. Its durable materials ensure longevity, which significantly reduces maintenance costs over time.

Equipped with a state-of-the-art energy management system, the OM11-19 excels in energy efficiency. This feature not only minimizes operational costs but also supports sustainability efforts. The system continuously monitors energy consumption and adjusts operational parameters accordingly, ensuring that energy use is optimized without compromising performance.

Another notable aspect is its intuitive control interface. The Bryant OM11-19 features advanced digital controls that provide users with straightforward operation and easy programming capabilities. This user-friendly interface facilitates quick adjustments and real-time monitoring, ensuring peak performance at all times.

The OM11-19 is also designed with versatility in mind. It is compatible with various attachments and upgrades, allowing users to customize the equipment to better fit their specific needs. This adaptability makes it a favored choice across different industries, including construction, manufacturing, and logistics.

Safety is a top priority in the design of the OM11-19. It comes equipped with several safety features such as overheat protection, automatic shut-off, and emergency stop functions. These systems are designed to protect both the equipment and users, creating a safe working environment.

In terms of technology, the Bryant OM11-19 incorporates the latest advancements in automation and sensor technology. These integrated systems enhance operational reliability and performance. Users benefit from real-time data analytics, allowing them to make informed decisions quickly.

In summary, the Bryant OM11-19 is a highly efficient and versatile piece of equipment that combines durability, advanced technology, and user-friendly features. Its robust design, energy management system, and focus on safety make it an attractive option for a variety of applications, delivering outstanding performance in any setting. Whether for industrial use or more specialized applications, the OM11-19 stands out as a competitive and reliable choice in the market.
Top Page Image Contents