Storing Cutoff Saw
For long periods of storage:
1.Drain and clean the fuel tank, run engine until carburetor is dry.
2.Thoroughly clean the cutoff saw; tighten all nuts and bolts (except for adjusting screws).
3.Remove the blade and loosen the
Notes on transport and storage:
1.Avoid knocks and bumps.
2.Abrasive blades must not be exposed to direct sunlight or other sources of heat during transport and storage.
Store the machine in a place free of moisture and heat source, preferably in a place with consistent temperature. Do not store it near corrosive liquids.
3.Composite blade must be protected against frost.
The remainder of this manual provides detailed exploded parts views and parts lists for the cutoff saw.
17