Panasonic 999000 owner manual Operator

Always install the blade so that the arrow on the blade points in direction of the rotation of the spindle.

Before carrying or transporting your cutoff saw, make sure the engine is OFF. Never leave the engine running while unattended (e.g. on the ground).

Proper tension of the V-belt is important. In order to avoid a false setting, the tensioning procedure must be followed as described in your manual. Always make sure the hexagonal collar nuts for the cast arm are tightened securely. Check V-belt tension after one hour of operation and correct if necessary.

3. Operator:

The cutoff saw is a one-person tool. Start and operate this saw without assistance.

Make sure you are in good physical condition and are not under the influence of any substance such as drugs or alcohol which may impair vision or dexterity. Take breaks as needed to prevent you from getting fatigued.

Never let the cutoff saw run unattended. NO untrained personal should ever be allowed to use a cutoff machine. Bystanders, especially children and animals, should not be allowed in the area where a cutoff machine is in use.

Do not lend or rent your cutoff machine without this Operation Manual. Employers should establish a training program for operators of this saw to ensure safe operation of this powerful tool.

Avoid loose-fitting jackets, scarves, neckties, jewelry, flared or cuffed pants, unconfined long hair or anything that could become caught or entangled on any moving parts of the unit. Wear overalls or long pants to protect your legs. Do not wear shorts.

Protect your hands with gloves when handing the cutoff saw. Heavy-duty, nonslip gloves improve your grip and protect your hands.

Operate the cutoff saw with both hands, keeping a firm grip on the front and rear handles.

Maintain good balance and footing at all times.

Good footing is most important. Wear sturdy boots with nonskid soles. Steel-toed safety boots are recommended.

To reduce the risk of injury to your eyes, never operate the cutoff saw unless wearing goggles or properly fitted safety glasses with adequate top and side protection. Proper eye protection is a must!

Wear an approved safety hard hat to protect your head. Cutoff machine noise could damage your hearing: Wear earplugs or ear protectors at all times.

Cutting masonry, concrete, metal and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm.

6