NOTE:
When charging a cool battery pack (below 5°C (41°F)) in a warm place, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature. Otherwise battery pack may not be fully charged.
Cool down the charger when charging more than two battery
packs consecutively.
Do not insert your fingers into con- tact hole, when holding charger or any other occasions.
CAUTION:
Do not use power source from an engine generator.
Do not cover vent holes on the charger and the battery pack.
.LAMP INDICATIONS
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange Flashing
Charger is plugged into the AC outlet. Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin when temperature of battery pack drops.
Charging is not possible. Clogged with dust or malfunction of the battery pack.
. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben- zine, or other volatile solvents for cleaning.
BATTERY RECYCLING
ATTENTION:
FOR Ni-MH Battery Packs, EY9251
A nickel metal hydride battery that is recyclable powers the product you have pur- chased.
Please call
.ACCESSORIES
Use only bits suitable for size of drill’s chuck.
MAXIMUM RECOMMENDED CAPACITIES
EY6450 |
| MATERIAL / CONDITION | SPEED |
Screw | Wood screw | ø 4.2 mm (3/16") Ï 75 mm (3") | HIGH |
driving | ø 3 mm (1/8") Ï 13 mm (1/2") SPC t = 1.6 mm (1/16") | HIGH | |
Drilling | Wood | ø 50 mm (2") Yellow pine t = 38 mm | LOW |
Metal | ø 13 mm (1/2") SPC t = 1.6 mm (1/16") | HIGH |
- 10 -