LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE,
UNIT MODE SETTING,
AND FAN MODE SETTING.
|
|
| UP AND DOWN |
|
|
| BUTTONS INCREASE |
|
|
| OR DECREASE THE |
|
|
| DESIRED TEMPERATURE |
RESET/FILTER | FAN | MODE | SETTINGS. |
|
|
| |
|
| MODE BUTTON SELECTS | |
|
| BETWEEN OFF, HEAT, |
|
|
| COOL, AND AUTO |
|
|
| OPERATION. |
|
RESET FILTER BUTTON |
| FAN BUTTON CHOOSES |
|
RESTARTS THE TIMER |
| BETWEEN ON OR AUTO |
|
THAT CALCULATES |
| FAN OPERATION |
|
THE NEXT AIR FILTER |
|
|
|
CHANGE OR CLEANING |
|
|
|
Fig. 2—Bryant Non-Programmable Thermostat
•Check Condensate Drain
Your air conditioner will remove humidity from your home during the cooling season. After a few minutes of operation, you should be able to see water trickle from the condensate drain of the cooling coil. Check this occasionally to be sure the drain system is not clogged. Of course, don’t expect to see much drainage if you live in a very dry environment.
•When Not To Use Your Unit
Do not operate your unit when outdoor temperatures are below 55°F.
OPERATINGYOUR AIR CONDITIONER
The operation of your air conditioning system is controlled by the indoor thermostat. You simply adjust the thermostat and it maintains the indoor temperature at the level you select. Most
thermostats have 3 controls: a tempera- ture control selector, a FAN control, and a SYSTEM or MODE control.
The temperature control selector is a button, lever, or set of buttons that allows you to establish the degree of temperature that you wish to maintain for your personal comfort. Some ther- mostats possess 2 temperature control selectors: 1 for setting the temperature desired during the cooling cycle, and 1 for setting the heating operation
MODE BUTTON SELECTS | LCD READOUT DISPLAYS |
BETWEEN OFF, HEAT, | CURRENT ROOM TEMPERATURE, |
COOL, AND AUTO | DESIRED ROOM TEMPERATURE |
OPERATION. | OR OUTDOOR TEMPERATURE, |
PROGRAM BUTTONS | UNIT MODE SETTING, |
FAN MODE SETTING, | |
FOR PROGRAMMING | AND TIME OF DAY. |
HEATING/COOLING |
|
CYCLES. |
|
COPY PREVIOUS DAY | PROGRAM | MODE | UP AND DOWN |
|
|
| |
|
|
| BUTTONS INCREASE |
CHANGE DAY | END PROGRAM | FAN | OR DECREASE THE |
|
|
| |
|
|
| DESIRED TEMPERATURE |
SET TIME | RESET FILTER | HOLD | SETTINGS. |
SET TIME | FAN BUTTON CHOOSES |
BUTTON | BETWEEN ON OR AUTO |
| FAN OPERATION |
RESET FILTER BUTTON | HOLD BUTTON MAINTAINS |
RESTARTS THE TIMER | THE CURRENT TEMPERATURE |
THAT CALCULATES | AND OVERRIDES PROGRAMMED |
THE NEXT AIR FILTER | TEMPERATURE CHANGES |
CHANGE OR CLEANING | UNTIL RESET. |
Fig. 3—Bryant Programmable Thermostat
3