Additional Specific Safety Rules

1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

2.Keep blades sharp. Sharp blades will do the job better and safer.

3.Keep hands away from cutting area. When sawing never reach underneath or behind the material being cut for any reason.

4.When you have finished a cut be careful not to come into contact with the blade. Turn off the motor immediately.

5.Make sure the material to be cut is firmly held to prevent movement.

6.Stay clear of end pieces that may fall after being cut off.

7.Never use a liquid coolant with portable band saws.

8. Liquid coolants can increase the risk of electric shock. Use only stick wax to lubricate the blade.

9. EXERCISE EXTREME CAUTION WHEN BLIND CUTTING TO BE CERTAIN THAT THERE ARE NO FOREIGN OBJECTS SUCH AS ELECTRICAL WIRE, CONDUIT, PLUMBING PIPES, ETC., THAT MAY COME INTO CONTACT WITH THE BLADE.

10.Never hold work in your hand, lap, or against other parts of your body when sawing.

11.Wear eye and hearing protection. Always use safety glasses. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards.

Hearing equipment should comply with ANSI S3.19 standards.

12. Use of this tool can generate and disburse dust or other airborne particles, including wood dust, crystalline silica dust and

asbestos dust. Direct particles away from face and body. Always operate tool in well ventilated area and provide for proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and wash exposed areas with soap and water.

SAVE THESE INSTRUCTIONS!