TOOLS NEEDED FOR ASSEMBLY
Supplied |
| Not Supplied | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 mm hex key | Medium screwdriver |
#2 Phillips screwdriver
Adjustable wrench
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the scroll saw and all its parts, and compare against the list below and the illustration on the next page. With the help of an assistant place the saw on a secure surface and examine it carefully.
!WARNING
•To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/ assembling the scroll saw.
•The scroll saw is heavy and should be lifted with care. If needed, get the assistance of someone to lift and move the scroll saw.
•If any part is missing or damaged, do not attempt to assemble the scroll saw, or plug in the power cord until the missing or damaged part is correctly replaced.
TABLE OF LOOSE PARTS |
| |
ITEM | DESCRIPTION | QUANTITY |
A. | Scroll saw assembly | 1 |
B.Hardware bag assembly
| Blade | 1 |
| Hex key | 1 |
STAND |
|
|
C. | Short upper support | 2 |
D. | Long upper support | 2 |
E. | Leg | 4 |
F. | Short bottom support bracket | 2 |
G. | Long bottom support bracket | 2 |
H. | Stand hardware bag |
|
| Cushion | 4 |
| Serrated toothed | 20 |
| Hexagon flange nut | |
|
| |
| Cap hd. sq.neck bolt | 16 |
| Hex. hd. bolt | 4 |
| Flat washer | 4 |
| Spacer | 4 |
8