Troubleshooting, Maintenance, Service | Porter-Cable 6605 instruction

TROUBLESHOOTING

For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers, or call the Porter-Cable Customer Care Center at (888)-848-

5175.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary.

BRUSH INSPECTION (If applicable)

For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE CENTER.

At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the service station for immediate service.

SERVICE

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.porter-cable.com. You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-888-848-5175 to receive personalized support from highly-trained technicians.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about Porter-Cable, its factory-owned branches, or an Authorized Warranty Service Center, visit our website at www.porter-cable. com or call our Customer Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others.

You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.).

6605 specifications

The Porter-Cable 6605 is a highly regarded tool in the realm of power saws, particularly known for its efficacy in making precision cuts in a variety of materials. Tailored for both professional contractors and DIY enthusiasts, this product blends performance, durability, and user-friendly features, making it a go-to choice for many woodworking and construction projects.

One of the standout features of the Porter-Cable 6605 is its powerful motor. Equipped with a robust 6.5-amp motor, this tool ensures the ability to handle intricate cuts and heavy-duty tasks with ease. The consistent power output enables smooth and efficient cutting through both soft and hard woods, while also providing versatility when working with engineered materials.

The design of the 6605 emphasizes user comfort and control. It boasts an ergonomic handle that reduces fatigue during extended use, allowing users to maintain precision without risking strain. Lightweight and compact, this saw is easy to maneuver, making it suitable for both overhead and intricate work. Additionally, the saw features a sturdy base that enhances stability during operation, resulting in straighter cuts.

In terms of technology, the Porter-Cable 6605 utilizes a keyless blade change system, which allows for quick and efficient blade swaps, enabling users to transition between various cutting tasks without delay. This feature aligns with the tool’s intended purpose of maximizing productivity on the job site or in the workshop. The tool is also compatible with a range of blade types, providing enhanced flexibility for different applications.

Another essential characteristic of the Porter-Cable 6605 is its adjustable cutting depth and bevel angle settings. With the capability to make cuts up to 2 inches deep and a bevel capacity of 45 degrees, users can achieve a range of cutting angles and depths, catering to diverse project requirements.

Furthermore, safety features, such as the blade guard and the safety switch, enhance the overall user experience by minimizing the risk of accidents. By prioritizing safety without compromising on performance, the Porter-Cable 6605 establishes itself as a reliable powerhouse in the toolkit of any woodworker or contractor.

In summary, the Porter-Cable 6605 combines power, precision, and versatility, offering an array of features that bolster its role as an essential tool for cutting tasks. With its user-centric design, advanced technology, and safety features, it remains a preferred choice for those seeking reliable performance in a portable electric saw.