Attaching the Motor to the Router Base

1.To remove motor unit from base unit: Open the clamp (A) Fig. 1. While holding base, turn power unit COUNTERCLOCKWISE until lower pin (B) in motor housing is disengaged from groove in base. Lift power unit free from base unit.

2.Clean and insert shank of bit into collet until shank bottoms, then back it out approximately 1/16".

Do not use router bits with a diameter in excess of 1.5" in this tool.

3.Lay power unit on its side on bench with the collet pointing AWAY from you.

4.Place one wrench on flats of chuck with the opposite end of the wrench resting on the bench to your left (Fig. 2).

5.Place other wrench on collet and tighten COUNTERCLOCKWISE. TIGHTEN FIRMLY.

6.To remove the bit, reverse the procedure.

AVOID POSSIBLE DAMAGE TO COLLET. NEVER TIGHTEN COLLET WITHOUT BIT.

ATTACHING THE MOTOR TO THE ROUTER BASE

DISCONNECT TOOL FROM POWER SOURCE.

1.Open the clamp (A) Fig. 1 and set the power unit in the base unit.

2.Align the lower pin of the power unit (B) Fig. 1 with the groove in the base.

3.Rotate the power unit CLOCKWISE into the base until the upper guide pins are set in the groove of the base.

4.Close the clamp.

ADJUSTING DEPTH OF CUT

DISCONNECT TOOL FROM POWER SOURCE.

1.Open the clamp (A) Fig. 3A.

2.Hold the base (E) and turn the power unit (F) Fig. 3A COUNTER-CLOCK- WISE until the tip of the bit is above the bottom of the base.

3.Set the tool on a flat surface.

4.Turn the power unit (F) Fig. 3A CLOCKWISE until bit touches the work.

5.Close the clamp (A) Fig. 3A.

6.Rotate the depth adjusting ring (B) Fig. 3A until the zero-line (C) Fig. 3B is opposite the index line (D) Fig. 3B on the housing.

7.Open the clamp (A) Fig. 3A.

8.Tip the router so that the bit is clear of the wood surface. Turn the power unit (F) Fig. 3A CLOCKWISE until the index line (D) Fig. 3B on the motor housing reaches the desired depth indicated on the ring.

9.Close the clamp (A) Fig. 3A.

A15149 specifications

The Porter-Cable A15149 is a versatile and powerful tool that has garnered attention among professionals and DIY enthusiasts alike. This product is primarily recognized for its robust performance and practical design features, which make it an essential addition to any toolbox.

One of the standout attributes of the A15149 is its reliability. Designed to handle a variety of tasks, this tool is equipped with a potent motor that delivers consistent power, ensuring that it can tackle even the most demanding jobs with ease. Its superior performance reduces downtime, enabling users to complete projects efficiently.

The A15149 includes several innovative technologies that enhance its usability. For instance, its advanced dust collection system significantly improves visibility during use, allowing craftsmen to maintain precision. This feature is particularly useful in woodworking and construction, where a clear line of sight is crucial for accuracy. Furthermore, its ergonomic design ensures comfort during prolonged usage, reducing fatigue and improving control.

Another key characteristic of the Porter-Cable A15149 is its versatile application. It is engineered to work with various materials, including wood, plastic, and metal, making it suitable for diverse projects. Whether you are cutting, sanding, or shaping materials, this tool adapts seamlessly to your needs.

The user-friendly interface of the A15149 is another notable trait. With intuitive controls and easily adjustable settings, it caters to both novices and seasoned professionals. Quick adjustments can be made on-the-fly, saving time and ensuring the tool performs optimally for the task at hand.

Durability is also a strong point of the A15149. Built with high-quality materials, it’s designed to withstand rigorous use, making it a wise investment for those who frequently engage in demanding tasks. The rugged construction ensures that it can endure the rigors of a job site while maintaining its performance over time.

In summary, the Porter-Cable A15149 stands out due to its reliability, innovative technologies, versatility, user-friendly design, and durability. These features come together to make it a practical choice for a wide range of applications, catering to both professionals and hobbyists who demand excellent results without compromising on quality. Whether in a professional setting or a home workshop, the A15149 proves to be an essential tool that enhances productivity and effectiveness.