Porter-Cable 891, 8931, 892 instruction manual Routers

Page 1

ESPAÑOL: PÁGINA 23

FRANÇAISE : PAGE 45

Instruction manual

Routers

MODEL 891

MODEL 892

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2005 Porter-Cable Corporation

MODEL 8931

IMPORTANT

Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations.

The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

Part No. 903618 - 01-17-05

Image 1

Contents Routers Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Clear the router bit area before starting motor Additional Specific Safety RulesSymbol Definition Motor Carton ContentsExtension Cord Selection Installing and Removing the BIT 891 AssemblyFunctional Description ForewordInstalling and Removing the BIT Using Spindle Lock Actuator Adjusting Depth of CUT Installing the MotorAdjusting SUB-BASE Alignment All Routers Vacuum Hose Installing and Removing the BITPull up on plunge locking lever Adjusting the Plunge BaseAdjusting Plunge Locking Lever Operation Connecting to Power SourceVariable Speed Control Starting and Stopping the MotorEdge Guide Using the ToolGripVac Parts Installing the Optional GripvacSoft Start Using the MULTI-FUNCTION CaseTemplet Guides Using a Router Accessory Table Keep Tool Clean Troubleshooting MaintenanceFailure to Start LubricationAccessories ServiceWarranty Replacement Parts Service and RepairsCanadian PORTER-CABLE Delta Service Centers