Porter-Cable 891, 8931, 892 Soft Start, Templet Guides, Using the MULTI-FUNCTION Case

Page 19

SOFT START

This router has a “Soft Start” feature designed to minimize startup reaction torque.

TEMPLET GUIDES

A wide variety of templet guides is available for use in pattern and templet routing operations. A typical combi- nation bit, templet guide, and locknut are illustrated in Fig. 29.

LOCKNUT

ROUTER

TEMPLETBASE GUIDE

ROUTER BIT

SUB-BASE

Fig. 29

Disconnect tool from power source.

To install, insert the templet guide in the center hole of the router base and secure in place with a locknut. Before connecting the router to the power source, install the bit, adjust the depth of cut, and rotate the router chuck by hand to ensure that the bit or collet do not contact the templet guide.

USING THE MULTI-FUNCTION CASE

The case for your router has been designed to provide protection when transporting the router to the job site, and to make the router easier to use in the workshop.

STORAGE AND TRANSPORTATION

The case provides storage for the collet wrench at (A) Fig. 30, an extra collet at (B), and 1/4" and 1/2" bits at (C). Store the user’s manual and compact disc in the slot (D). Store the templet guides in the holes (E) and the height adjustment handle in slot (G).

NOTE: All items are not included with all router kits, but can be purchased as accessories.

A C

H

G E

H D B

Fig. 30

E

C

B D

A

Fig. 31

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Routers Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Clear the router bit area before starting motor Additional Specific Safety RulesSymbol Definition Motor Carton ContentsExtension Cord Selection Foreword AssemblyInstalling and Removing the BIT 891 Functional DescriptionInstalling and Removing the BIT Using Spindle Lock Actuator Adjusting Depth of CUT Installing the MotorAdjusting SUB-BASE Alignment All Routers Vacuum Hose Installing and Removing the BITPull up on plunge locking lever Adjusting the Plunge BaseAdjusting Plunge Locking Lever Operation Connecting to Power SourceVariable Speed Control Starting and Stopping the MotorEdge Guide Using the ToolGripVac Parts Installing the Optional GripvacSoft Start Using the MULTI-FUNCTION CaseTemplet Guides Using a Router Accessory Table Lubrication Troubleshooting MaintenanceKeep Tool Clean Failure to StartReplacement Parts Service and Repairs ServiceAccessories WarrantyCanadian PORTER-CABLE Delta Service Centers
Top Page Image Contents