Porter-Cable 691, 690LRVS instruction manual Additional Specific Safety Rules

Page 6

ADDITIONAL SPECIFIC SAFETY RULES

1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

2.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

3.Disconnect tool from power source before making adjustments or changing bits.

4.Tighten Collet nut securely to prevent the bit from slipping.

5.Use a clamp or some other device to hold the workpiece rigidly in position and clear the path of the tool of obstructions.

6.Provide clearance under workpiece for router bit when through-cutting.

7.Check to see that the cord will not “hang up” during routing operation.

8.Clear the router bit area before starting motor.

9.Maintain firm grip on router to resist starting torque.

10.Keep hands clear of bit when motor is running to prevent personal injury.

11.Keep cutting pressure constant. Do not overload motor.

12.let the motor come to a complete stop before putting the tool down.

13.Never touch router bits after use. They may be extremely hot.

14.Never tighten collet nut without a bit.

15.Do not use router bits with a diameter in excess of 2-1/2" at RPM above 13,000. Router bits up to 3-1/2" in diameter can be used when speed control is set for 13,000 RPM or less.

16.Always keep chip shield clean and in place.

17.Avoid “Climb-Cutting”(see “Using The Router” section in this manual). “Climb-cutting” increases the chance for loss of control resulting in possible personal injury.

18.Do not hand-hold the router in an upside-down or horizontal position. The motor can separate from the base if not properly attached according to the instructions.

19.Wear eye and hearing protection. Always use safety glasses. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards. Hearing equipment should comply with ANSI S3.19 standards.

20.Take precautions against dust inhalation. The dust generated by certain woods and wood products can be injurious to your health. Always operate machinery in well-ventilated areas, and provide for proper dust removal. Use wood dust collection systems whenever possible. Also, use face or dust mask if cutting operation is dusty. Dust mask protection should comply with MSHA/NIOSH certified respirator standards. Splinters, air- borne debris, and dust can cause irritation, injury, and/or illness.

21.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow any safety information available from your material supplier.

SAVE THESE INSTRUCTIONS!

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Routers Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the router bit area before starting motorSymbol Definition Extension Cord Selection Functional DescriptionMotor ForewordInstalling and Removing the BIT Installing the MotorOperation Adjusting Depth of CUT Adjusting SUB-BASE Alignment All RoutersBase Removing MotorAdjusting the Plunge Base Page Adjusting the Plunge Locking Lever Attaching the Power Unit to the D HandleLoosen the clamp screw a Fig Connecting to Power Source Starting and Stopping the MotorSoft Start Variable Starting Speed Control 690LRVSTroubleshooting Guide Edge GuideTemplet Guides Maintenance ServiceAccessories WarrantyCanadian PORTER-CABLE Delta Service Centers

690LRVS, 691 specifications

The Porter-Cable 691 and 690LRVS routers represent a significant step forward in woodworking tools, combining power, precision, and user-friendly features. Designed for DIY enthusiasts and professional woodworkers alike, these routers are steadfast companions for a variety of routing tasks.

One of the defining characteristics of the Porter-Cable 691 is its robust motor. The router is equipped with a powerful 1.75-horsepower motor that delivers consistent performance, making it ideal for both heavy-duty applications and intricate detail work. With variable speed control ranging from 8,000 to 27,000 RPM, users can easily adjust the speed according to the material being routed, ensuring optimal results and minimizing the risk of damaging the workpiece.

The Porter-Cable 690LRVS model is recognized for its precision. It features a durable aluminum base that provides stability and allows for precise depth adjustments. The easy-to-use depth adjustment system employs a clear scale, enabling woodworkers to make accurate depth settings quickly. This means that intricate designs and patterns can be created without the worry of uneven cuts.

In addition to its performance capabilities, safety is a top priority for Porter-Cable. The design incorporates a soft-start feature which reduces the torque on startup, helping to maintain control during operation. This is particularly beneficial when handling large bits or working with hard materials, ensuring both safety and confidence for the user.

Another key feature of the Porter-Cable 691 and 690LRVS routers is their compatibility with various accessories. This versatility allows users to expand their capabilities, from edge profiling to mortising and everything in between. The industry-standard 1/4-inch and 1/2-inch collets ensure that a wide range of router bits can be utilized, adding to their utility.

The ergonomic design of these routers further enhances their appeal. The handles are designed for comfort and control, allowing for prolonged use without fatigue. Additionally, the compact size of the routers makes them easy to maneuver, ideal for both larger projects and detailed work.

In conclusion, the Porter-Cable 691 and 690LRVS routers exemplify a perfect blend of power, precision, and safety features. They are designed for woodworkers who demand reliable performance, making them an essential addition to any workshop, whether for simple home projects or professional furniture crafting. With their advanced technologies and user-centric design, these routers stand out as a top choice in the woodworking community.
Top Page Image Contents