Porter-Cable 121 instruction manual Specific Safety Rules and Symbols, Jackson, TN

Page 4

899604 - 03-08-02.qxd 3/18/02 9:12 AM Page 4

SPECIFIC SAFETY RULES AND SYMBOLS

1.Hold tool by insulated gripping surfaces when performing an operation where the sanding tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

2.Keep hands and body parts away from rotating spindle. Contact with rotating spindle can cause severe cuts and abrasions.

3.Use proper safety equipment. Wear safety goggles to protect your eyes, wear hearing protection to protect your ears, and wear a protective mask to minimize breathing in the fine dust created while sanding.

4.Sanding of lead-based paint is not recommended. Lead-based paint should only be removed by a professional.

5.Always keep the base of the sander in contact with a secure workpiece to prevent loss of control.

6.Do not operate Oscillating Sander without all guards and covers securely in place.

7.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.

8. WARNING: There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

 

Technical Service Manager

 

Porter-Cable Corporation

 

4825 Highway 45 North

 

Jackson, TN 38305

SYMBOL

DEFINITION

V

volts

A

amperes

Hz

hertz

W

watts

kW

kilowatts

µF

microfarads

l

liters

kg

kilograms

N/cm2

newtons per square centimeter

Pa

pascals

h

hours

min

minutes

s

seconds

........................

alternating current

3

three-phase alternating current

3N

three-phase alternating current with neutral

........................

direct current

4

Image 4
Contents Instruction Oscillating Spindle manual Sander General Safety Rules Electrical SafetyPersonal Safety Work AreaService Tools USE and CareSpecific Safety Rules and Symbols Jackson, TNAdditional Safety Rules for Paint Removal Functional Description ForewordDust Collection Nozzle Installing the Quick Release Drum SystemTo Start and Stop Oscillating Sander Edge Guide Installation Variable Speed ControlMaintenance Accessories Canadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 15 pages 13.2 Kb