Porter-Cable D26126-024-0 instruction manual Before Each Start-Up, How to Start

Page 13

Before Each Start-Up:

1.Place On/Auto/Off lever to "OFF" and close air regulator.

2.Pull regulator knob out, turn counterclockwise until it stops. Push knob in to lock in place.

3.Attach hose and accessories. NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect socket.

Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air

tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating.

How to Start:

1.Turn the On/Auto/Off lever to "AUTO" and allow tank pressure to build. Motor will stop when tank pressure reaches "cut-out" pressure.

2.Pull the regulator knob out and turn clockwise to increase pressure. When the desired pressure is reached push knob in to lock in place. The compressor is ready for use.

NOTE: Always operate the air compressor in well-ventilated areas free of gasoline or other combustible vapors. If the compressor is being used to operate a sprayer DO NOT place near the spray area.

13 - ENG

D26126

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Pancake Compressor Safety Guidelines Definitions Risk of Explosion or Fire HazardRisk from Flying Objects Risk of BurstingRisk to Breathing Risk of Electrical ShockRisk from Moving Parts Risk of BurnsRisk of Falling Hazard Risk of Unsafe Operation Duty Cycle GlossaryModel no CF2600Grounding Instructions Location of the Air CompressorImproper Grounding can Result in Electrical Voltage and Circuit Protection Extension CordsKnow Your Air Compressor Description of OperationDescription of Operation Before First Start-up How to StopBefore Each Start-Up How to StartTo Check Safety Valve MaintenanceCustomer Responsibilities To Drain TankTo Replace or Clean Check Valve Service and AdjustmentsTo Replace Regulator Storage Limited Warranty
Top Page Image Contents