Porter-Cable C2550 instruction manual Checking, Oil

Page 17

5.Drain water from air tank by opening drain valve (counter-clockwise) on bottom of tank.

Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a risk of air

tank rupture.

6.After the water has been drained, close the drain valve (clockwise). The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

Oil

Drain tank to release air pressure before removing the dipstick or oil drain plug.

Compressor head and cylinder sleeve are very hot. Do not touch.

Checking

1.Set the On/Auto/Off lever to “OFF”.

2.Remove dipstick (A) and check oil on dipstick for visual signs of contaminants (water, dirt, etc).

Make sure air vent (C) in dipstick is free from

debris. If air vent is blocked pressure can build in crankcase causing damage to air compressor and possible personal injury.

3.Wipe oil from dipstick.

4.Replace dipstick and allow oil to collect on dipstick.

5.Remove dipstick and check oil level on dipstick, + mark indicates full and the - mark indicates add oil. If oil level is below - mark, slowly add oil until it reaches the + (full) mark on the dipstick.

 

C

 

 

A

 

 

(+)Full

+

B

(-)Add

-

 

 

NOTE: Use an oil specifically formulated for use in an air compressor, such as Porter-Cable PAS1 air compressor oil. Oil may be found at the store where the air compressor was purchased.

6.Replace dipstick (A).

Changing

1.Set the On/Auto/Off lever to “OFF”.

2.Remove the dipstick (A).

3.Remove the oil drain plug (B) and drain oil into a suitable container.

4.Replace the oil drain plug (B).

5.Slowly fill crankcase with oil. Crankcase capacity is 6 fluid ounces (177.4 ml). Oil level should be at the + (full) mark on the dipstick.

Overfilling with oil will cause premature compressor failure. Do not overfill.

6.Replace dipstick (A).

17- ENG

A02233

Page 16 Page 18
Image 17
Page 16 Page 18
Contents C2550 ModelImportant Safety Instructions Safety Guidelines DefinitionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Duty Cycle SpecificationsGlossary Assembly AccessoriesTo Add Oil To Pump Location of the Air Compressor InstallationVoltage and Circuit Protection Extension CordsKnow Your Air Compressor Description of Operation OperationBefore Starting How to Use Your UnitBefore Each Start-Up How to StartTo Check Safety Valve MaintenanceCustomer Responsibilities To Drain TankOil CheckingMotor Air Filter Inspection and ReplacementTo Replace Regulator Service and AdjustmentsRecommended Handle Alternate Handle Storage StorageProblem Cause Correction TroubleshootingPressure reading Problem Cause Correction Problem Cause Correction ENG A02233 Responsibility of Original Purchaser initial User Limited Warranty

C2550 specifications

The Porter-Cable C2550 is a powerful and versatile air compressor designed to meet the needs of both professionals and DIY enthusiasts. This unit stands out for its reliability and performance, making it a popular choice among users who require a robust air compressor for various applications.

One of the main features of the Porter-Cable C2550 is its 25-gallon tank, which allows for extended operation without the need for constant refills. This larger capacity means you can run pneumatic tools for longer periods, making it suitable for tasks such as nailing, stapling, and inflation. The compressor is powered by a powerful 1.5 HP motor that is equipped to handle demanding jobs and deliver a sustained air supply.

The C2550 features an oil-free pump, which not only reduces maintenance requirements but also enhances its portability. The oil-free design means there is no need to change oil or worry about oil spills, making it ideal for use in clean environments. Additionally, the pump has a maximum pressure of 125 psi, providing ample power for most pneumatic applications.

Another notable feature is the heavy-duty construction of the compressor. The unit is built with a durable steel frame that protects the tank and components from damage during transportation and use. The large wheels and ergonomic handle make it easy to move around the job site, ensuring user convenience and mobility.

The compressor comes equipped with a dual output pressure regulator, allowing for precise control over airflow and pressure settings. This feature is particularly useful when switching between different pneumatic tools that may require varying air pressures for optimal performance.

Moreover, the C2550 incorporates advanced safety features, including thermal overload protection that prevents the motor from overheating, ensuring durability and longevity. This air compressor is also relatively quiet for its class, operating at lower noise levels, which is a significant advantage in residential or commercial settings where noise restrictions may apply.

Overall, the Porter-Cable C2550 stands out for its combination of capacity, power, and portability. With user-friendly features, robust construction, and consistent performance, it is an ideal choice for anyone in need of a dependable air compressor for a variety of applications. Whether for professional use or personal projects, the C2550 delivers the performance and reliability that users expect from Porter-Cable products.
Top Page Image Contents