Porter-Cable C2550 instruction manual How to Use Your Unit, Before Starting

Page 14

Dipstick: Indicates the amount of oil in the pump, the + mark indicates full and the - mark indicates oil needs to be added. See Oil paragraphs in the Maintenance section for instructions.

Motor Thermal Overload Protector (not shown): The motor has an automatic reset thermal overload protector. If the motor overheats for any reason, the overload protector will shut off the motor. The motor must be allowed to cool down before restarting. The compressor will automatically restart after the motor cools.

Dipstick

Air Intake Filter (not shown): This filter is designed to clean air coming into the pump. This filter must always be clean and ventilation openings free from obstructions. See "Maintenance".

Check Valve: When the air compressor is

 

 

 

 

 

 

 

 

 

 

operating, the check valve is “open”, allowing

 

 

 

 

 

 

 

Pressure

compressed air to enter the air tank. When the

 

 

Release

 

 

 

Valve

 

air compressor reaches “cut-out” pressure, the

 

 

 

 

 

 

 

 

 

 

check valve “closes”, allowing air pressure to

 

 

 

 

Check

remain inside the air tank.

 

Valve

 

 

 

 

 

 

 

 

 

 

 

Pressure Release Valve: The pressure release valve located on the side of the pressure switch, is designed to automatically release

compressed air from the compressor head and the outlet tube when the air compressor

reaches “cut-out” pressure or is shut off. The

pressure release valve allows the motor to restart freely. When the motor stops running, air will be heard escaping from this valve for a few seconds. No air should be heard leaking when the motor is running, or continuous leaking after unit reaches “cut-out” pressure.

How to Use Your Unit

How to Stop:

1.Set the On/Auto/Off lever to “OFF”.

Before Starting

Break-in Procedure

Serious damage may result if the following break-in instructions are not closely followed.

This procedure is required before the air compressor is put into service and when the check valve or a complete compressor pump has been replaced.

1.Make sure the On/Auto/Off lever is in the "OFF" position.

2.Check oil level in pump. See “Oil” paragraph in the “Maintenance” section for instructions.

NOTE: Pull coupler back until it clicks to prevent air from escaping through the quick connect.

A02233

14- ENG

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model C2550Safety Guidelines Definitions Important Safety InstructionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Duty Cycle SpecificationsGlossary Accessories AssemblyTo Add Oil To Pump Installation Location of the Air CompressorExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationHow to Use Your Unit Before StartingHow to Start Before Each Start-UpCustomer Responsibilities MaintenanceTo Check Safety Valve To Drain TankChecking OilAir Filter Inspection and Replacement MotorService and Adjustments To Replace RegulatorStorage Recommended Handle Alternate Handle StorageTroubleshooting Problem Cause CorrectionPressure reading Problem Cause Correction Problem Cause Correction ENG A02233 Limited Warranty Responsibility of Original Purchaser initial User

C2550 specifications

The Porter-Cable C2550 is a powerful and versatile air compressor designed to meet the needs of both professionals and DIY enthusiasts. This unit stands out for its reliability and performance, making it a popular choice among users who require a robust air compressor for various applications.

One of the main features of the Porter-Cable C2550 is its 25-gallon tank, which allows for extended operation without the need for constant refills. This larger capacity means you can run pneumatic tools for longer periods, making it suitable for tasks such as nailing, stapling, and inflation. The compressor is powered by a powerful 1.5 HP motor that is equipped to handle demanding jobs and deliver a sustained air supply.

The C2550 features an oil-free pump, which not only reduces maintenance requirements but also enhances its portability. The oil-free design means there is no need to change oil or worry about oil spills, making it ideal for use in clean environments. Additionally, the pump has a maximum pressure of 125 psi, providing ample power for most pneumatic applications.

Another notable feature is the heavy-duty construction of the compressor. The unit is built with a durable steel frame that protects the tank and components from damage during transportation and use. The large wheels and ergonomic handle make it easy to move around the job site, ensuring user convenience and mobility.

The compressor comes equipped with a dual output pressure regulator, allowing for precise control over airflow and pressure settings. This feature is particularly useful when switching between different pneumatic tools that may require varying air pressures for optimal performance.

Moreover, the C2550 incorporates advanced safety features, including thermal overload protection that prevents the motor from overheating, ensuring durability and longevity. This air compressor is also relatively quiet for its class, operating at lower noise levels, which is a significant advantage in residential or commercial settings where noise restrictions may apply.

Overall, the Porter-Cable C2550 stands out for its combination of capacity, power, and portability. With user-friendly features, robust construction, and consistent performance, it is an ideal choice for anyone in need of a dependable air compressor for a variety of applications. Whether for professional use or personal projects, the C2550 delivers the performance and reliability that users expect from Porter-Cable products.
Top Page Image Contents