Porter-Cable CFFC350B, CFFR350B Specifications, Glossary, Duty Cycle, Accessories

Page 8

SPECIFICATIONS

 

Model No.

CFFR350B

 

CFFC350B

Horsepower Peak

3.0

Bore

2.375"

Stroke

1.35"

Voltage-Single Phase

120

Minimum Branch Circuit Requirement

15 amps

Fuse Type

Time Delay

Air Tank Capacity (Gallon)

4.5

Approximate Cut-in Pressure

105 PSIG

Approximate Cut-out Pressure

135 PSIG

SCFM @ 90 PSIG

5.3

GLOSSARY

Become familiar with these terms before operating the unit. CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory. When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts off - protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

Porter-Cable air compressors should be operated on not more than a 50% duty cycle. This means an air compressor that pumps air more than 50% of one hour is considered misuse, because the air compressor is undersized for the required air demand. Maximum compressor pumping time per hour is 30 minutes.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

A01787

8- ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Oilfree Portable Air Compressor Safety Guidelines Definitions Important Safety InstructionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Specifications AccessoriesGlossary Duty CycleAssembly InstallationUnpacking Location of the Air CompressorExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationHow to Use Your Unit How to StopBefore Each Start-Up How to Start How to Use Remote ConsoleHow to transport unit Customer Responsibilities MaintenanceTo Check Safety Valve Air Compressor Pump Intake and Exhaust Valves Air Filter Inspection and ReplacementTo Drain Tank Service and Adjustments To Replace or Clean Check ValveStorage Troubleshooting Problem Cause CorrectionPressure reading Check wiring connection ENG A01787 Limited Warranty

CFFR350B, CFFC350B specifications

The Porter-Cable CFFR350B and CFFC350B are two remarkable options in the realm of cordless nailers, specifically designed for professionals and DIY enthusiasts alike. Built by a company with a longstanding reputation for producing reliable and efficient power tools, these models reflect the latest technological advancements and user-focused features.

One of the standout features of the CFFR350B is its cordless design. Powered by an efficient 20V MAX lithium-ion battery, it provides the freedom of movement without cumbersome air hoses or gas cartridges. This is invaluable for those working in tight spaces or on ladders, as it allows for easy maneuverability and less fatigue during prolonged use. The CFFC350B similarly benefits from a cordless design, ensuring users can work effectively across a variety of job sites.

Both the CFFR350B and CFFC350B are equipped with a robust motor that delivers consistent firing power, whether users are driving fasteners into softwood or hardwood. The ability to handle a range of fastener sizes enhances versatility, with the CFFR350B capable of accommodating 1-1/4 inch to 3-1/2 inch framing nails, while the CFFC350B specializes in fastening applications, such as flooring and trim.

Another noteworthy feature is the tool-free depth adjustment. This functionality allows users to set the exact depth of the nails for precision work, ensuring that each nail is driven to the desired level without the need for additional tools. Along with this, both models include a tool-free jam release mechanism, which simplifies the process of clearing any nail jams that may occur, minimizing downtime during projects.

Additionally, the CFFR350B and CFFC350B come with an adjustable exhaust that directs air away from the user, keeping the workspace clean and enhancing user comfort. Their lightweight design paired with an ergonomic handle further promotes comfort over extended use, reducing hand fatigue and improving overall handling.

In conclusion, the Porter-Cable CFFR350B and CFFC350B nailers are essential additions to any tool collection. Their combination of cordless convenience, powerful motor performance, user-adjustable features, and thoughtful ergonomics makes them ideal for tackling a wide range of framing and fastening tasks with efficiency and precision.
Top Page Image Contents