Porter-Cable CFFR350B, CFFC350B Assembly, Installation, Unpacking, Location of the Air Compressor

Page 9

ASSEMBLY

Unpacking

1.Remove unit from carton and discard all packaging.

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

●

●

●

●

●

Locate the air compressor in a clean, dry, and well ventilated area.

Place on a solid surface to prevent rocking or tipping.

The air compressor should be located at least 12" away from the wall or other obstructions that will interfere with the flow of air.

The air filter must be kept clear of obstructions which could reduce air flow to the air compressor.

The air compressor requires fresh air flow for proper cooling. DO NOT

ALLOW THE COMPRESSOR TO GET WET.

GROUNDING INSTRUCTIONS

RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing

an escape wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustrations). The plug must be used with an outlet that has been installed and grounded in accordance with all local codes and ordinances.

1.The cord set and plug with this unit contains a grounding pin. This plug MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

2.Make sure the outlet being used has

 

the same configuration as the

 

 

 

 

 

 

 

 

 

Plug

 

 

 

 

 

 

grounded plug. DO NOT USE AN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADAPTER. See illustration.

 

 

 

 

 

 

 

 

 

 

 

 

 

Grounded

3.

Inspect the plug and cord before each

 

 

 

 

 

Outlets

 

 

use. Do not use if there are signs of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

damage.

 

 

 

 

 

 

 

4.

If these grounding instructions are not

Grounding Pin

 

completely understood, or if in doubt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

9- ENG

A01787

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Oilfree Portable Air Compressor Important Safety Instructions Safety Guidelines DefinitionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Accessories SpecificationsGlossary Duty CycleInstallation AssemblyUnpacking Location of the Air CompressorVoltage and Circuit Protection Extension CordsKnow Your Air Compressor Description of Operation OperationHow to Stop How to Use Your UnitBefore Each Start-Up How to Use Remote Console How to StartHow to transport unit Maintenance To Check Safety ValveCustomer Responsibilities Air Filter Inspection and Replacement To Drain TankAir Compressor Pump Intake and Exhaust Valves To Replace or Clean Check Valve Service and AdjustmentsStorage Problem Cause Correction TroubleshootingPressure reading Check wiring connection ENG A01787 Limited Warranty

CFFR350B, CFFC350B specifications

The Porter-Cable CFFR350B and CFFC350B are two remarkable options in the realm of cordless nailers, specifically designed for professionals and DIY enthusiasts alike. Built by a company with a longstanding reputation for producing reliable and efficient power tools, these models reflect the latest technological advancements and user-focused features.

One of the standout features of the CFFR350B is its cordless design. Powered by an efficient 20V MAX lithium-ion battery, it provides the freedom of movement without cumbersome air hoses or gas cartridges. This is invaluable for those working in tight spaces or on ladders, as it allows for easy maneuverability and less fatigue during prolonged use. The CFFC350B similarly benefits from a cordless design, ensuring users can work effectively across a variety of job sites.

Both the CFFR350B and CFFC350B are equipped with a robust motor that delivers consistent firing power, whether users are driving fasteners into softwood or hardwood. The ability to handle a range of fastener sizes enhances versatility, with the CFFR350B capable of accommodating 1-1/4 inch to 3-1/2 inch framing nails, while the CFFC350B specializes in fastening applications, such as flooring and trim.

Another noteworthy feature is the tool-free depth adjustment. This functionality allows users to set the exact depth of the nails for precision work, ensuring that each nail is driven to the desired level without the need for additional tools. Along with this, both models include a tool-free jam release mechanism, which simplifies the process of clearing any nail jams that may occur, minimizing downtime during projects.

Additionally, the CFFR350B and CFFC350B come with an adjustable exhaust that directs air away from the user, keeping the workspace clean and enhancing user comfort. Their lightweight design paired with an ergonomic handle further promotes comfort over extended use, reducing hand fatigue and improving overall handling.

In conclusion, the Porter-Cable CFFR350B and CFFC350B nailers are essential additions to any tool collection. Their combination of cordless convenience, powerful motor performance, user-adjustable features, and thoughtful ergonomics makes them ideal for tackling a wide range of framing and fastening tasks with efficiency and precision.
Top Page Image Contents