Porter-Cable C7510 instruction manual Before Each Start-Up, How to Start

Page 15

Before Each Start-Up:

1.Place On/Auto/Off lever to “OFF”.

2.Close the globe valve.

3.Attach hose and accessories. NOTE: A regulator MUST be installed when using accessories rated at less than 110 PSI.

Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air

tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating.

How to Start

1.Turn the On/Auto/Off lever to “AUTO” and allow tank pressure to build. Motor will stop when tank pressure reaches “cut-out” pressure.

2.When the tank pressure reaches “cut-out” pressure open the globe valve.

IMPORTANT: When using regulator and other accessories refer to the manufacturers instructions.

NOTE: Always operate the air compressor in well-ventilated areas free of gasoline or other combustible vapors. If the compressor is being used to operate a sprayer, DO NOT place compressor near the spray area.

15- ENG

D28176

Page 14 Page 16
Image 15
Page 14 Page 16
Contents C7510 ModelImportant Safety Instructions Safety Guidelines DefinitionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Specifications GlossaryDuty Cycle Unpacking AccessoriesAssembly Tools Required for AssemblyInstallation Location of the Air CompressorAnchoring of the Air Compressor Grounding Instructions Wiring InstructionsAir Distribution System Know Your Air Compressor Description of Operation OperationHow to Use Your Unit Before Starting Break-in ProcedureHow to Stop Before Each Start-Up How to StartMaintenance To Check Safety ValveCustomer Responsibilities Changing To Drain TankOil CheckingBelt Guard Removal Air Filter Inspection and ReplacementBelt Replacement Adjusting Belt TensionMotor Pulley/Flywheel Alignment Air Compressor Pump Intake and Exhaust Valves Inspect Air Lines and Fittings for LeaksAir compressor Head Bolts Torquing To Replace or Clean Check Valve Service and AdjustmentsAdditional Service StorageMotor Problem Cause Correction TroubleshootingProlonged excessive use Problem Cause Correction Problem Cause Correction ENG D28176 Limited Warranty
Top Page Image Contents