Porter-Cable 3812 instruction manual Instruction Bench Top Table Saw Manual

Page 1

		ESPAÑOL: PÁGINA 19
		FRANÇAISE : PAGE 37

Instruction	10" Bench Top Table Saw
Manual
		Model 3812

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2001 Porter-Cable Corporation

Shown assembled with accessory stand model 38129

and accessory outfeed support model 38239.

IMPORTANT

Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations.

The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference.

Model No. _____________________________________

Type __________________________________________

Serial No.______________________________________

Part No. 895558 (015)

Image 1

Contents Instruction Bench Top Table Saw Manual General Safety Rules Unpacking Additional Safety Rules for Circular SawsIllustrates the blade guard in place Assembling Blade Guard and Spreader AssemblyMiter Gage Removing Blade GUARD/SPREADER AssemblyMiter Gage Holder Fastening SAW to a Supporting Surface Assembling RIP Fence to SAW TableMotor Fastening SAW to TWO SAW HorsesExtension Cord SelectionAdjusting Table Insert Locking Switch in the OFF PositionBlade Raising and Lowering Control Blade Tilting ControlRIP Fence Operation and Adjustments Adjusting 0 and 45 Degree Positive StopsRIP Fence Extension Replacing the RIP Fence ScaleRipping Thin Stock Adjusting Blade Parallel to Miter Gage Slots Miter Gage Operation and AdjustmentsDust Port Changing the Blade Storage of AccessoriesCROSS-CUTTING OperationRipping Using Accessory Dado Head Using Auxiliary Wood Facing on RIP FenceConstructing a Featherboard Keep Tool Clean MaintenanceConstructing a Push Stick PushstickPORTER-CABLE Delta Service Centers