Bryant 577D Safety Considerations, FIRE, EXPLOSION, Electrical Shock Hazard, For Your Safety

Page 2

SAFETY CONSIDERATIONS

Improper installation, adjustment, alteration, service maintenance, or use can cause explosion, fire, electrical shock, or other conditions which may cause death, personal injury, or property damage. Consult a qualified installer, service agency, or your distributor or branch for information or assistance. The qualified installer or agency must use factory-authorized kits or accessories when modifying this product. Refer to the individual instructions packaged with the kits or accessories when installing.

Follow all safety codes. Wear safety glasses, protective clothing, and work gloves. Have a fire extinguisher available. Read these instructions thoroughly and follow all warnings or cautions included in literature and attached to the unit. consult local building codes, the current editions of the National Fuel Gas Code (NFGC) NFPA 54/ANSI Z223.1, and the National Electrical Code (NEC) NFPA 70.

In Canada refer to the current editions of the National Standards of Canada CAN/CSA-B149.1 and .2 Natural Gas and Propane Installation codes, and Canadian Electrical Code CSA C22.1

Recognize safety information. This is the safety-alert symbol . When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words: DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe per- sonal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight sugges- tions which will result in enhanced installation, reliability, or op- eration.

Note: Installer: This manual should be left with the equipment user.

!WARNING

FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury, death or property damage.

Installation and servicing of this equipment can be hazardous due to mechanical and electrical components. Only trained and qualified personnel should install, repair, or service this equipment.

!CAUTION

FOR YOUR SAFETY

Failure to follow this caution may result in personal injury.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

!WARNING

FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury, death or property damage.

Do not use this unit if any part has been underwater. Immediately call a qualified service technician to inspect the unit and to replace any part of the control system which has been underwater.

!WARNING

FIRE AND EXPLOSION HAZARD

What to do if you smell gas:

1.Do not try to light any appliance.

2.Do not touch any electrical switch; do not use any phone in your building.

3.Leave the building immediately.

4.Immediately call your gas supplier from a nearby phone. Follow the gas supplier’s instructions.

5.If you cannot reach your gas supplier, call the fire department.

!WARNING

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury and/or death.

Before performing recommended maintenance, be sure the main power switch to unit is turned off and lock-out tag is installed.

!WARNING

FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury, death and/or property damage.

1.Do not turn off the electrical power to unit without first turning off the gas supply.

2.Before attempting to start the gas heating section, familiarize yourself with all the procedures that must be followed.

!WARNING

FIRE, EXPLOSION HAZARD

Failure to follow this warning could result in personal injury, death, and/or property damage.

Do not attempt to light by hand.

!CAUTION

CUT HAZARD

Failure to follow this caution may result in personal injury.

When removing access panels or performing maintenance functions inside your unit, be aware of sharp sheet metal parts and screws. Although special care is taken to reduce sharp edges to a minimum, be extremely careful when handling parts or reaching into the unit.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Owner’s Information Manual FIRE, EXPLOSION, Electrical Shock Hazard Safety ConsiderationsFor Your Safety Fire and Explosion HazardTo start unit gas heat Unit IntroductionOperating Your Unit To shut off unit gas heatTo Start Unit Gas Heat To shut off unit electric coolingMaintenance and Service Cooling ModeGas Heating Mode Routine MaintenanceTo Start Unit Electric Cooling Fire and Unit Operation Hazard Maintenance and Care for the Equipment OwnerFIRE, EXPLOSION, Electrical Shock and CUT Hazard Personal Injury and Unit Damage Hazard EXPLOSION, Burn and Environmental Hazard

577D specifications

The Bryant 577D is a distinguished model in the world of HVAC (Heating, Ventilation, and Air Conditioning) systems, tailored for residential and commercial applications. This unit offers a perfect blend of innovation and efficiency, catering to the needs of users who seek reliability and performance.

One of the most notable features of the Bryant 577D is its advanced two-stage heating capability. This allows the system to operate at two different heating levels, providing customized comfort depending on the conditions. The dual-stage operation optimizes energy consumption by running at a lower stage during milder conditions and ramping up to a higher stage when the cold becomes more severe. This not only enhances comfort but also contributes to lower energy bills.

The Bryant 577D utilizes a variable-speed blower motor, a technology that significantly improves air distribution and comfort levels in any space. With the ability to adjust airflow based on the specific demands of the environment, it reduces noise levels while ensuring consistent heating throughout the area. This feature is particularly beneficial in achieving a quieter operation, making it suitable for both home and office environments.

In terms of efficiency, the Bryant 577D boasts impressive energy efficiency ratings. It is designed to meet or exceed the latest energy efficiency standards. This not only helps in reducing carbon footprints but also translates into significant savings on energy costs over time. The unit’s design incorporates high-quality insulation and advanced heat exchanger technology, further enhancing its efficiency.

Combining durability and performance, the Bryant 577D is built with robust materials that ensure long-lasting operation. Its compact design allows for easier installation and maintenance. The model comes equipped with advanced diagnostics, making it simpler for technicians to identify and address issues quickly.

To enhance user convenience, the Bryant 577D is compatible with smart thermostat technologies, allowing homeowners to control their HVAC system remotely. This capability to easily program heating schedules and monitor performance through smartphones adds a layer of flexibility that modern consumers value.

In summary, the Bryant 577D stands out with its two-stage heating, variable-speed blower motor, energy efficiency, and durable design. Its commitment to providing comfort and reliability while remaining energy-efficient makes it a leading choice for those in search of high-quality HVAC solutions. Whether for residential or commercial use, the Bryant 577D is engineered to meet diverse heating needs efficiently.
Top Page Image Contents