Powermatic 720HD operating instructions Unpacking, Contents of the Shipping Container

Page 7

Unpacking

Remove all crating and plastic from around the Mortiser. Check for shipping damage; report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Mortiser is assembled and running properly.

Open the cabinet rear door and remove any boxes and accessory items. Compare these with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.

Contents of the Shipping Container

1Mortiser

1Handle

1Chisel and Auger set – 3/4”

1Chisel and Auger set - 1”

3Bushings - 5/8”, 3/4” and 1-1/8” I.D.

(NOTE: The 5/8” bushing is already installed on the mortiser)

3Combination Wrenches: 12-14, 17-19, 22-24

4Hex (Allen) Wrenches: 3, 4, 5 and 6mm

1 Chuck Key

1Chuck Extension Adaptor

1Wood Table

2Phillips Flat Head Screws, M6 x 20L

1Reversible (Cross Point/Flat Head) Screwdriver

1Owner's Manual

1Warranty Card

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Part No. M-1791309 WMH Tool GROUP, IncMore Information Warranty and ServiceTable of Contents Page Page Introduction Specifications Unpacking Contents of the Shipping ContainerTools required for assembly AssemblyInstalling Handle Installing Wood TableGrounding Instructions Installing Bushing, Chisel and AugerFeet Extension cordsTable Removal and Storage AdjustmentsSetting Table to Vertical Position Squaring Table To ChiselChuck Extension Adaptor Depth Setting RodHead Movement Clamp Setting Lateral StopsStock Stop Lower Work Support Re-setting the HeadGib Adjustment Chisel Parallel to WorkpieceGib for Lateral Movement Operating ControlsTool Storage Gib for Front-to-Back MovementOperation MaintenanceAuger Sharpening Chisel and AugerLubrication ChiselProbable Cause Remedy TroubleshootingReplacement Parts Trouble720HD Heavy Duty Mortiser Index No. Part No Description Size Qty Parts List 720HD Heavy Duty Mortiser720HD-157 720HD-1116 Electrical Connections WMH Tool Group, Inc

720HD specifications

The Powermatic 720HD is a robust industrial-grade wood lathe designed for serious woodworkers and professionals seeking precision and versatility in their turning projects. One of its standout features is the 3 HP motor, which delivers powerful performance for both heavy and intricate turning tasks. This motor, along with the variable speed controls, allows users to adjust speeds smoothly from 50 to 3200 RPM, accommodating a wide range of materials and techniques.

A key technology incorporated in the Powermatic 720HD is its Electronic Variable Speed (EVS) system. This innovative feature enables users to effortlessly change the speed settings with a few simple turns of a dial, providing a level of convenience and efficiency that is essential in production environments. Additionally, the heavy-duty spindle, measuring 1.25 inches in diameter, contributes to the overall stability and strength of the lathe, allowing for larger workpieces and more aggressive cuts without compromising performance.

Another impressive characteristic of the Powermatic 720HD is its robust construction. Built with a cast-iron bed, this lathe ensures exceptional stability and reduces vibrations during operation. This solid foundation is crucial for achieving a smooth finish on workpieces, as it minimizes the chance of chattering or movement while turning.

The lathe features an innovative tool rest that can be easily adjusted and repositioned to accommodate various turning angles and techniques. This flexibility is crucial for woodturners who require precision and adaptability in their setups. Moreover, the large, easy-to-read digital readout displays the current speed, making it easier for users to monitor and adjust their settings on the fly.

Safety is a priority with the Powermatic 720HD, evident in its thoughtfully designed features such as the emergency stop button and the hinged motor cover, which provides easy access while ensuring full protection when not in use. The lathe also offers a generous 38-inch distance between centers, allowing for considerable workpiece lengths, making it ideal for bowl and vessel turning.

In summary, the Powermatic 720HD is a powerful and versatile wood lathe designed with quality and user convenience in mind. Its combination of a robust motor, advanced electronic speed control, and durable construction makes it a top choice for both professional and hobbyist woodworkers looking to elevate their turning capabilities to new heights.
Top Page Image Contents