Powermatic 720HD Assembly, Installing Handle, Installing Wood Table, Tools required for assembly

Page 8

Assembly

Tools required for assembly

forklift or hoist with straps/slings 14mm wrench (provided)

4 and 6mm hex wrenches (provided)

1.Remove the four screws that secure the Mortiser to the wood pallet, using a 14mm wrench.

2.With a forklift or hoist, lift the machine off the pallet and into its desired location.

3.The Mortiser should be located in a dry area, on a sturdy, level floor, and with sufficient lighting. Leave plenty of space around the machine for operations and routine maintenance work.

4.If desired, the Mortiser can be further stabilized by securing it to the floor, using lag screws through the four holes in the base.

The mortiser should be disconnected from the power source during assembly procedures.

5.Unpainted areas of the machine have been treated with a rust preventative. This should be removed with a soft cloth and a mild solvent. Do not use paint thinner, lacquer thinner, gasoline or mineral spirits; these will damage painted surfaces and plastic parts. Do not use an abrasive pad.

Installing Handle

1.Use a 4mm hex wrench to remove the screw, washer and spring from the shaft (Figure 1).

2.Mount the hub of the handle onto the shaft as shown. Make sure the hub slides all the way onto the shaft.

3.Re-install spring, washer and screw. Tighten screw.

Installing Wood Table

1.To install the wood table, first remove the right hand screw at the right of the clamp (Figure 2), with a 6mm hex wrench, and loosen the left hand screw from beneath. Pivot the clamp out of the way.

2.Mount the wood table with two flat head screws as shown.

3.Re-position the clamp and install the screw.

8

Figure 1

Figure 2

Page 7 Page 9
Image 8
Page 7 Page 9
Contents WMH Tool GROUP, Inc Part No. M-1791309Warranty and Service More InformationTable of Contents Page Page Introduction Specifications Contents of the Shipping Container UnpackingAssembly Installing HandleInstalling Wood Table Tools required for assemblyInstalling Bushing, Chisel and Auger Grounding InstructionsExtension cords FeetAdjustments Setting Table to Vertical PositionSquaring Table To Chisel Table Removal and StorageHead Movement Depth Setting RodChuck Extension Adaptor Stock Stop Setting Lateral StopsClamp Re-setting the Head Gib AdjustmentChisel Parallel to Workpiece Lower Work SupportOperating Controls Tool StorageGib for Front-to-Back Movement Gib for Lateral MovementMaintenance OperationSharpening Chisel and Auger LubricationChisel AugerTroubleshooting Replacement PartsTrouble Probable Cause Remedy720HD Heavy Duty Mortiser Parts List 720HD Heavy Duty Mortiser Index No. Part No Description Size Qty720HD-157 720HD-1116 Electrical Connections WMH Tool Group, Inc

720HD specifications

The Powermatic 720HD is a robust industrial-grade wood lathe designed for serious woodworkers and professionals seeking precision and versatility in their turning projects. One of its standout features is the 3 HP motor, which delivers powerful performance for both heavy and intricate turning tasks. This motor, along with the variable speed controls, allows users to adjust speeds smoothly from 50 to 3200 RPM, accommodating a wide range of materials and techniques.

A key technology incorporated in the Powermatic 720HD is its Electronic Variable Speed (EVS) system. This innovative feature enables users to effortlessly change the speed settings with a few simple turns of a dial, providing a level of convenience and efficiency that is essential in production environments. Additionally, the heavy-duty spindle, measuring 1.25 inches in diameter, contributes to the overall stability and strength of the lathe, allowing for larger workpieces and more aggressive cuts without compromising performance.

Another impressive characteristic of the Powermatic 720HD is its robust construction. Built with a cast-iron bed, this lathe ensures exceptional stability and reduces vibrations during operation. This solid foundation is crucial for achieving a smooth finish on workpieces, as it minimizes the chance of chattering or movement while turning.

The lathe features an innovative tool rest that can be easily adjusted and repositioned to accommodate various turning angles and techniques. This flexibility is crucial for woodturners who require precision and adaptability in their setups. Moreover, the large, easy-to-read digital readout displays the current speed, making it easier for users to monitor and adjust their settings on the fly.

Safety is a priority with the Powermatic 720HD, evident in its thoughtfully designed features such as the emergency stop button and the hinged motor cover, which provides easy access while ensuring full protection when not in use. The lathe also offers a generous 38-inch distance between centers, allowing for considerable workpiece lengths, making it ideal for bowl and vessel turning.

In summary, the Powermatic 720HD is a powerful and versatile wood lathe designed with quality and user convenience in mind. Its combination of a robust motor, advanced electronic speed control, and durable construction makes it a top choice for both professional and hobbyist woodworkers looking to elevate their turning capabilities to new heights.
Top Page Image Contents