Powermatic 511 operating instructions Adjustments, Changing the Blade

Page 14

3.Select height of saw blade above the rollers. Move the carriage until the index tab is aligned with the corresponding dimension on the vertical ruler. Lock the carriage securely to the guides with the locking knob.

4.Start motor and allow it to reach full speed.

5.Place workpiece on the side of machine according to direction of cut shown by the arrow on the carriage. DO NOT DROP workpiece on rollers.

6.With the motor at full speed, move the workpiece slowly and smoothly through the saw. Do not force the workpiece, as it may cause binding.

NOTE: If the blade binds in the workpiece, or the workpiece shifts during the cut, stop the motor, back the workpiece out of the saw, reposition workpiece, restart motor, and then begin the cut again.

Do not place hands, clothing or body parts under carriage or in cutting path of blade. Do not look directly down line of cut as dust and debris are generated during this operation.

7.As the workpiece passes through the saw, move to the other side and complete the cut by pulling the workpiece past the blade. Support the upper piece to prevent it from pinching the blade or the kerf protector, or falling away from the machine.

8.When cut is finished, turn off motor and wait for blade to come to a complete stop. Remove workpieces.

9.Rotate turntable back to vertical position and return it to the top of the guides. Lock the carriage.

Adjustments

The 511 Panel Saw is preset at the factory, so no adjustments should be necessary at first. However, certain alignments should be checked, and as the saw gets more use adjustments may be needed.

Changing the Blade

1.Disconnect saw from power source and observe appropriate lockout procedures to prevent machine from being accidentally powered.

2.Tighten carriage lock and remove the blade

guard by unscrewing and removing the

Figure 13

knob, shown in Figure 13.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Vertical Panel Saw Part No. M-0460280Warranty and Service More Information WMH Tool Group WarrantyTable of Contents Page Page Page General Operating Instructions Operating TipsPanel Saw Features Introduction Specifications UnlimitedGrounding Instructions Installation of Panel SawUncrating Operation Extension CordsCrosscutting Ripcutting Adjustments Changing the BladeAdjusting Crosscut Rulers Alignment Align RollersAlign Blade Parallel to Guides Maintenance DailyPeriodically Every six monthsReplacement Parts Parts List 511 Panel Saw Index No. Part No Description Size Qty6813142 6940064 Panel Saw Page Panel Saw, Motor with Pushbutton Assembly Panel Saw Dust Collection System Electrical Connections Factory Service Centers For the Skil worm drive motorParts List Skilsaw, Model 586, Type 2 511 Panel Saw Index No. Part No DescriptionCord and Plug 5970 Strain Relief Step Installation of Short Panel FenceDescription Size Qty Step Optional Accessories Adjustable Stop Optional AccessoryPage WMH Tool Group
Related manuals
Manual 28 pages 15.68 Kb

511 specifications

The Powermatic 511 is a revered tool in the woodworking community, known for its solid construction and innovative features. Tailored for both hobbyists and professionals, it provides precision and efficiency to enhance woodworking projects.

At the heart of the Powermatic 511 is its robust design, which is built to withstand heavy use while maintaining optimal performance. The cast iron table provides excellent stability, minimizing vibration and ensuring that workpieces remain secure during operations. This solid foundation also contributes to a larger working surface, allowing users to tackle larger materials with ease.

One of the standout features of the Powermatic 511 is its powerful motor, which delivers consistent performance even under demanding conditions. This ensures that the machine can easily handle various types of wood, from softwoods to hardwoods, without compromising on speed or quality. The precision-ground table aids in achieving accurate cuts, offering users confidence in their results.

The machine incorporates advanced technologies, such as innovative dust collection systems that help maintain a clean work environment. This not only enhances the user's experience but also contributes to better health by reducing exposure to wood dust. The ease of dust extraction is a critical factor, especially in workshops where cleanliness is paramount.

Another notable characteristic of the Powermatic 511 is its user-friendly controls. The intuitive design allows for easy adjustments, ensuring that users can quickly switch between functions without extensive setup. This accessibility makes it an ideal choice for both beginners and seasoned woodworkers who value efficiency and simplicity.

Versatility is also a key aspect of the Powermatic 511. It supports a variety of tasks, making it suitable for different woodworking techniques. Whether it’s for shaping, sanding, or finishing, this tool adapts to multiple applications, reducing the need for additional equipment.

In summary, the Powermatic 511 is a powerful, efficient, and versatile tool that embodies the essence of quality woodworking. Its solid construction, advanced technologies, and user-friendly features make it a valuable addition to any workshop, helping craftsmen bring their creative visions to life with precision and ease. Investing in the Powermatic 511 means investing in tools that enhance your woodworking journey, ensuring that both novices and experts appreciate its capabilities.
Top Page Image Contents