Step | Powermatic 511 specs

Step 2:

With a power drill, attach the fence bracket to the vertical cross members with the mounting screws provided. The mounting screws provided are self-tapping. (Note: The fence bracket is pre-drilled for mounting.)

Step 3:

Attach the fence mounting bracket to the back side of the panel saw frame, as shown in Figure 26. The edge of the mounting bracket should be approximately 5/8" from the edge of the fence bracket. (Note: The center of the mounting hole on the fence bracket should be aligned with the center of the mounting bracket.) Using a power drill, attach one end of the mounting bracket to the horizontal cross member on which the fence bracket is sitting, and attach the other end to the next horizontal cross member above it.

Figure 26

Step 4:

Once the mounting bracket has been secured, return to the front of the panel saw and secure the right end of the fence bracket to the mounting bracket with the mounting screws provided.

Step 5:

With a tape measure, check the distance from the blade to the right end of the fence bracket. The distance should be approximately 4-1/2". (Note: The scale on the fence bracket starts with a measurement of 4-1/2".) If necessary, loosen the three mounting screws on the fence bracket and adjust it so that the exact distance from the blade to the right end of the fence bracket is 4-1/2".

Step 6:

Place the fence shelf between the bracket and the top of the round bushings with the black molding showing. If the shelf is not a snug fit, remove the shelf, loosen the bushing mounting bolts, press up on the bushing, retighten the mounting bolts and re-install the shelf.

Step 7:

To check the shelves for squareness, slide the saw carriage down and place the framing square on top of the left shelf and slide it over to the blade. If the shelf is not square to the blade, loosen the three mounting screws securing the fence bracket, move the bracket until the fence shelf is square to the blade and retighten mounting screws. Make a test cut using an 18" tall panel. Place the panel on the shelf and cut the end. Turn the panel around making sure that the same bottom reference is used and make a second cut. Measure at the top and bottom of the panel to make sure the panel is square. Make adjustments and test cuts as needed until squareness is achieved.

DO NOT make any adjustments to the panel saw itself, only adjust the fence brackets when checking for squareness.

Step 8:

Install the right side fence bracket to the right side of the panel saw. (Refer to Steps 1 thru 6).

Note: When the Short Panel Fence is not being used, the shelf can be stored behind the fence bracket.

511 specifications

The Powermatic 511 is a revered tool in the woodworking community, known for its solid construction and innovative features. Tailored for both hobbyists and professionals, it provides precision and efficiency to enhance woodworking projects.

At the heart of the Powermatic 511 is its robust design, which is built to withstand heavy use while maintaining optimal performance. The cast iron table provides excellent stability, minimizing vibration and ensuring that workpieces remain secure during operations. This solid foundation also contributes to a larger working surface, allowing users to tackle larger materials with ease.

One of the standout features of the Powermatic 511 is its powerful motor, which delivers consistent performance even under demanding conditions. This ensures that the machine can easily handle various types of wood, from softwoods to hardwoods, without compromising on speed or quality. The precision-ground table aids in achieving accurate cuts, offering users confidence in their results.

The machine incorporates advanced technologies, such as innovative dust collection systems that help maintain a clean work environment. This not only enhances the user's experience but also contributes to better health by reducing exposure to wood dust. The ease of dust extraction is a critical factor, especially in workshops where cleanliness is paramount.

Another notable characteristic of the Powermatic 511 is its user-friendly controls. The intuitive design allows for easy adjustments, ensuring that users can quickly switch between functions without extensive setup. This accessibility makes it an ideal choice for both beginners and seasoned woodworkers who value efficiency and simplicity.

Versatility is also a key aspect of the Powermatic 511. It supports a variety of tasks, making it suitable for different woodworking techniques. Whether it’s for shaping, sanding, or finishing, this tool adapts to multiple applications, reducing the need for additional equipment.

In summary, the Powermatic 511 is a powerful, efficient, and versatile tool that embodies the essence of quality woodworking. Its solid construction, advanced technologies, and user-friendly features make it a valuable addition to any workshop, helping craftsmen bring their creative visions to life with precision and ease. Investing in the Powermatic 511 means investing in tools that enhance your woodworking journey, ensuring that both novices and experts appreciate its capabilities.