U5047A PAG QUASAR INSTRUCTION MANUAL
PAG Quasar
All-Chemistry Charging System
Instruction Manual
CONTENTS |
| |
SECTION | PAGE | |
|
|
|
1 | SAFETY | 2 |
2 | SPECIFICATION | 3 |
3 | INSTALLATION | 6 |
4 | OPERATING INSTRUCTIONS | 7 |
5 | SERVICING & REPAIRS | 12 |
6 | WARRANTY | 14 |
U5047A PAG QUASAR INSTRUCTION MANUAL
SECTION 1
SAFETY
1.1This manual contains important safety and operating instructions. Please read these fully and note all warnings before using the charger. Please follow all instructions and retain this manual for future reference.
1.2PAG Quasar chargers are not intended for any use other than the charging of batteries and the powering of broadcast cameras as detailed in Section 2 , Specification, Page 3.
1.3IMPORTANT: Use only on AC supplies
1.4Protect the power cord from being walked on or pinched. Unplug this apparatus during lightning storms or when unused for long periods of time.
1.5Ensure that the ventilation slots are not obstructed when in use, e.g. do not site the charger on a carpet, or cover when in use.
1.6WARNING: Indoor use only. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
1.7Although the charger is reverse polarity and short circuit protected, extreme care should always be taken not to short circuit the battery itself. Rechargeable batteries can deliver power at a very high rate, and short circuiting even a partially charged battery could result in a fire or personal injury. PAG supplies a range of connector leads for most charging requirements, and does not accept responsibility for any other form of charging connection.
1.8Do not disassemble the charger. There are no
1.9Double Insulation: When servicing use only identical replacement parts.
1 | 2 |