Impact Wrench Kit by Wagan Tech

USER’S MANUAL — Please read before using this equipment.

________________________________________________________________________________________________________________________________________________________________

Thank you for purchasing the Impact Wrench Kit by Wagan Tech. With normal care and proper treatment it will provide years of reliable service. Please read all operating instructions carefully before use.

GENERAL SAFETY PRECAUTIONS :

1.Maintain labels and nameplates on this product. These carry important information.

2.Keep work area clean and dry. Cluttered, damp, or wet work areas invite injuries.

3.Keep children away from work area. Do not allow children to handle this product.

4.Store idle equipment. When not in use, tools and equipment should be stored in a dry location to prevent rust. Always lock up tools and equipment, and keep out of reach of children.

5.Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

6.Use eye protection. Wear ANSI approved safety impact eye goggles when using this product.

7.Dress safely. Do not wear loose clothing or jewelry, as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts.

8.Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etc.

9.Industrial applications must follow OSHA requirements.

10.Stay alert. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand.

11.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function.

Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.

12.Replacement parts and accessories: When servicing, use only identical replacement parts.

13.Maintain this product with care. Keep this product clean and dry for better and safer performance. For your safety, service and maintenance should be performed regularly by a qualified technician.

14.Use the right tool for the job. Do not attempt to force a small tool to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the capacity for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended.

15.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding work space. Always keep the area free of obstructions, grease, oil, trash, and other debris.

16.Always disconnect the Impact Wrench from its electrical supply source before changing Sockets or performing any maintenance on the tool.

WARNINGS :

-The Impact Wrench is designed for use with a 12 volt DC system only. Do not attempt to use any other type of electrical system.

-To avoid overheating the tool’s motor, do not use the Impact Wrench continuously for over 8 minutes..

-Prior to performing maintenance or repair on a vehicle, make sure to read and understand all instructions and safety precautions as outlined in the vehicle manufacturer’s owner’s manual.

-This Impact Wrench is designed for emergency purposes only. For non emergency purposes, use an industrial/commercial class Impact Wrench.

-In the event of an emergency, move the vehicle a safe distance from the roadside and away from all other traffic. Park the vehicle on dry, flat, level, ground. Turn off the vehicle, and set the emergency brake before attempting to change a flat tire.

-Avoid accidental electrical shock. Keep the Impact Wrench dry at all times.

Wagan and Wagan.com are trademarks used by Wagan Corporation.

www.wagan.com

2257 specifications

The Wagan 2257 is a highly regarded car inverter designed to convert DC (direct current) from a vehicle's battery into AC (alternating current) power, enabling users to run various electronic devices and appliances on the go. This versatile device has captured the attention of outdoor enthusiasts, travelers, and contractors alike, thanks to its impressive combination of features and its ability to provide reliable power in a compact form.

One of the standout characteristics of the Wagan 2257 is its power output capability. It features a continuous power output of 150 watts, with a peak output of 300 watts. This allows it to handle a range of devices, from small electronics like smartphones and laptops to more demanding appliances such as small fans and camping equipment. Users can feel confident that their devices will operate smoothly without risk of overloading.

Another notable feature of the Wagan 2257 is its built-in safety technologies. The inverter includes multiple protection mechanisms, such as over-voltage protection, low-voltage shutdown, and short-circuit protection. These safety features ensure that both the inverter and the connected devices remain safeguarded during use, which provides peace of mind to users, especially in outdoor settings where reliability is critical.

Portability is another significant advantage of the Wagan 2257. The unit is compact and lightweight, making it easy to transport in a vehicle or carry to different locations. This characteristic makes it especially appealing for campers, RVers, and anyone who frequently travels off the beaten path. The inverter can be connected to the vehicle's power source with ease, often utilizing the vehicle's cigarette lighter socket.

The design of the Wagan 2257 also includes dual AC outlets, allowing users to power two devices simultaneously. This feature is particularly useful during camping trips or outdoor gatherings where multiple gadgets may need charging or operation at the same time. The convenience of having multiple outlets is an added benefit that enhances the overall user experience.

In conclusion, the Wagan 2257 stands out as a powerful and portable inverter that combines functionality with safety technology. Its ability to convert DC power from a car to AC power, combined with its compact design and dual outlet feature, make it an ideal choice for anyone needing reliable power on the go. Whether for outdoor adventures, job sites, or emergency use, the Wagan 2257 proves to be a worthy investment for those seeking versatility and dependability in a power inverter.