Accessory Description and USE Listed Alphabetically

ACCESSORY DESCRIPTION AND USE (Listed Alphabetically) Continued

17.Time Delay Relay

An SPST delay relay which brieﬂy continues operation of the indoor blower motor to provide additional cooling after the compressor cycles off.

SUGGESTED USE: For improved efﬁciency ratings for certain combinations of indoor and outdoor units. Refer to ARI Unitary Directory.

18.Winter Start Control

An SPST delay relay which bypasses the low-pressure switch for approximately 3 minutes to permit start-up for cooling operation under low load conditions.

SUGGESTED USE: All air conditioners where Low-Ambient Controller has been added.

ACCESSORY USAGE GUIDELINE

	REQUIRED FOR	REQUIRED FOR	REQUIRED FOR
	LOW-AMBIENT	LONG-LINE	SEA COAST
	APPLICATIONS	APPLICATIONS*	APPLICATIONS
ACCESSORY	(Below 55°F)	(Over 50 Ft)	(Within 2 Miles)
Crankcase Heater	Yes	Yes	No
Evaporator Freeze Thermostat	Yes	No	No
Winter Start Control	Yes†	No	No
Accumulator	No	No	No
Compressor Start Assist	Yes	Yes	No
Capacitor and Relay	Yes	Yes	No
Capacitor and Relay
MotorMaster® Control
or	Yes	No	No
Low-Ambient Pressure Switch
Wind Bafﬂe	See Low-Ambient Instructions	No	No
Coastal Filter	No	No	Yes
Support Feet	Recommended	No	Recommended
Liquid-Line Solenoid Valve		See Long-Line
or	No	Application	No
Hard Shutoff TXV		Guideline
Ball Bearing Fan Motor	Yes‡	No	No

*For tubing line sets greater than 50 ft and/or 20 ft vertical differential, refer to Residential Split-system Long-Line Application Guideline and Service Manual.

† Only when low-pressure switch is used.

‡ Required for Low-Ambient Controller (full modulation feature) and MotorMaster® Control only.

SOUND POWER (dBA)

	Sound			OCTAVE BAND CENTER FREQUENCY (Hz)
Unit	Level
Size	(dBA)	125	250	500	1000	2000	4000	8000
018-C, D	76	54.0	63.5	66.0	66.0	65.0	62.5	55.5
024-C, D	78	53.0	69.0	69.5	71.0	68.5	64.5	60.5
030-C, D	80	53.5	64.0	66.5	69.5	69.0	65.0	58.5
036-C, D	80	57.0	65.5	71.0	75.0	71.0	67.5	62.0
042-C, D	80	62.5	69.0	72.0	75.0	72.0	69.5	62.5
048-C	82	63.0	71.0	71.0	72.0	73.5	68.0	63.5
060-C	82	61.5	69.5	71.0	74.5	70.0	69.0	66.0

—7—

593C specifications

The Bryant 593C is a remarkable model that stands as a testament to modern heating, ventilation, and air conditioning (HVAC) technology. Designed with efficiency and reliability in mind, the Bryant 593C offers a blend of features that cater to residential and light commercial needs. At the heart of its appeal is the exceptional efficiency level, achieving a high Seasonal Energy Efficiency Ratio (SEER) rating, which translates into substantial energy savings over time.

One standout characteristic of the Bryant 593C is its innovative two-stage compressor. This feature allows the unit to operate at different capacities, optimizing performance based on the demands of the environment. In moderate conditions, the system runs at a lower capacity, conserving energy while maintaining comfort. During extreme temperatures, the compressor ramps up to high capacity, ensuring that the indoor space remains comfortable regardless of external weather conditions.

The Bryant 593C is also equipped with advanced humidity control capabilities. Its variable-speed fan is instrumental in precisely adjusting airflow, leading to better humidity management throughout the home. This not only enhances comfort levels but also promotes a healthier indoor environment by reducing the likelihood of mold and mildew.

To ensure durability, the Bryant 593C incorporates a robust construction with corrosion-resistant materials. Its powder-coated finish protects the unit from harsh weather conditions, prolonging its lifespan. Additionally, the unit features quiet operation technology. This includes a sound-dampening design that minimizes noise levels, allowing homeowners to enjoy their indoor environment without disruptive sounds.

In terms of technology, the Bryant 593C is compatible with smart thermostats, enhancing user control over the heating and cooling processes. Homeowners can easily manage their indoor climate and energy consumption through user-friendly interfaces and smartphone applications. This connectivity is a significant advantage in energy management and convenience.

Furthermore, the Bryant 593C is designed with eco-friendliness in mind. It uses advanced refrigerants that are less detrimental to the ozone layer compared to traditional options, aligning with energy conservation goals and environmental sustainability.

In conclusion, the Bryant 593C is a state-of-the-art HVAC solution, combining efficiency, comfort, and sustainability. Its dual-stage compressor, humidity control, quiet operation, and smart integration make it a standout choice for those seeking reliable and efficient climate control in their homes or businesses. With its robust design and energy-saving technologies, the Bryant 593C is poised to deliver optimum performance for years to come.