Multiquip FM9 operation manual Safety Instructions, Rules for Safe Operation

Page 6

RULES FOR SAFE OPERATION

Do not operate or service this equipment before reading the operating and maintenance instructions manual or serious injury may result.

Do not operate this equipment unless all guards and safety devices are attached and in place.

Stop the engine when leaving the equipment.

Block the unit when leaving or when using on a slope

Maintain this equipment in a safe operating condition at all times.

Caution must be exercised while servicing this equipment. Rotating and moving parts can cause injury if contacted.

Stop the engine before servicing, adding fuel and oil.

When towing, an adequate safety chain must be fastened to the frame.

Keep all inexperienced and unauthorized people away from the equipment at all times.

Unauthorized equipment modifications will void all warranties.

Check all fasteners periodically for tightness. Also check towing tongue bolt, lock nut and wheel lug nuts for wear.

Wear safety glasses at all times when working around machinery.

Stop the engine and disconnect the spark plug before allowing anybody’s hands in the mixing drum.

Never pour or spray water over the engine or electric motor.

Always stand clear of dump handle when mixer is in operation. Any binding of material between the mixer blades and drum will cause drum and handle to quickly move in the discharge position.

The safety instruction decals shown must be on all Essick Mixers

CAUTION!

SHUT OFF ENGINE BEFORE

PUTTING HANDS IN MIXING DRUM

Caution Decal is P/N FM???????

SAFETY INSTRUCTIONS

1.Do not operate or service this machine before reading the operating and maintenance manual.

2.Keep all inexperienced and/or unauthorized people away from equipment at all times.

3.Do not operate this equipment unless all guards and safety devices are attached and in place.

4.Keep this equipment in safe operating condition at all times.

5.Caution must be exercised while servicing this equipment.

Rotating and moving parts can cause injury if contacted.

6.Stop engine and allow to cool before adding fuel or oil.

7.Stop engine when leaving equipment.

8.Block unit when parking on a slope.

9.Unauthorized equipment modifications will void all warranties.

ESSICK CONSTRUCTION PRODUCTS — A MULTIQUIP COMPANY — CARSON, CALIFORNIA

The safety instruction decal is P/N FM???????????

PAGE 6 — ESSICK FM9 — PARTS & OPERATION MANUAL — REV. #1 (03/12/01)

Image 6
Contents FM9 Finishing Machine Page Heres HOW to GET Help Table of Contents Earn Extra Discounts when You order by FAX Parts Ordering ProceduresSafety Instructions Rules for Safe OperationGeneral SafetyFM-9 Operations Operating InstructionsCleaning of Machine Mixing and Applyingvarious Material Exterior Dash StuccoSimulated Acoustic Ceilings Drywall MIX Application Full Acoustic Ceilings and Fireproofing Under Steel DeckFireproofing Steel Beams Brown CoatTransmission Maintenance of Machine EngineRotor and Installation CompressorBREAK-IN Packing Gland AdjustmentReplacing and Adjusting the Belts MaintainAIR System HI-VOLUME PumpParts List and Operating Instructions Model FM5E Read Both Sets of Instructions Before Operatingthis MachineFM-9 Specifications Explanation of Code in Remarks Column Items Found In the Remarks ColumnFM-9 Suggested Spare Parts FM-9 1 to 3 UnitsFM-9 CAB Assembly FM-9 CAB Assembly FM-9 Automatic Clutch Assembly FM-9 Automatic Clutch Assembly Drive Shaft and AgitatorFM-9 -TRANSMISSION Assembly Transmission Assembly FM-9 -TRANSMISSION Assembly Mainshaft Spacer FM-9 Browning Nozzle FM-9 Browning Nozzle FM-9 Finishing Nozzle FM-9 Finishing Nozzle Terms and Conditions of Sale Parts Page Post Office BOX 6254 CARSON, CA