LV850 LEVEL SENSOR
4 Connection
C A U T I O N
Check that the supply voltage corresponds with the voltage rating shown on the system.
1.Loosen the gland (PG7)(see Fig. 1).
2.Unscrew the cover of the housing (C).
3.Feed the supply cable through the gland (PG7) and the cover (C), or through the metal coupling supplied as option (see Fig. 2).
4.Connect the cable to the terminal block (TB) (see Fig. 3).
5.Set selector switch (S) to minimum or maximum:
1.- minimum
2.- maximum
6.Connect the supply voltage. LED (red) indicates.
4