INTRODUCTION
Thank you for selecting the Vector Battery Charger (VEC080). With proper care and use, it will give you years of dependable service. Please read and observe all safety warnings and cautions and this entire user’s manual, before installing or using this device. The manual should then be retained for quick reference whenever the unit is used. Figure 1 shows the battery charger and its components.
FEATURES
•The unit has two Charge Rate settings, controlled by one switch:
a)2 amp: for recharging motorcycles, lawn mowers, tractors, ATVs, snowmobiles and personal watercraft.
b)1 amp: for maintenance charging RVs, speciality vehicles, antique and classic cars, marine deep cycle batteries and more.
•Maintains battery charge in stored vehicles
•Excellent for winter
•Includes three connector sets:
a)DC accessory plug.
b)Battery harness clips.
c)Battery ring terminal harness.
•Charging indicators:
a)Red - bad connection, battery not able to accept charge, reverse polarity
b)Yellow - connection correct and charging.
c)Green - fully charged.
•
•Fully automatic; powers on when needed, powers off when battery is
•
•Automatically checks for correct polarity (requires a minimum of 4.0 volts battery voltage)
•Convenient,
•Charges with high frequency, pure, DC current.
4