1/2 Amp Battery Charger |
|
110/120 Volt AC Plug End | Accessory Outlet |
Cables |
|
Battery Harness | DC Accessory Plug |
Clips |
|
| Battery |
| Battery Terminal |
Chassis | Rings |
Battery
FIGURE 1. 2 Amp Battery Charger Connection Diagram
CONNECTING THE CHARGER WITH THE TERMINAL CLIPS
The charger’s output leads have
(Figure 2) (RED-POSITIVE and BLACK-NEGATIVE). These
Black connect directly to the corresponding connectors on the
battery posts.
1. | Position the RED clip on the terminal of the POSITIVE |
|
|
| battery post connector. |
|
|
2. | Position the BLACK clip on the NEGATIVE post |
|
|
| connector. |
| Red |
3. | Simply plug the AC plug of the AC/DC |
| |
| adapter/charger into any standard 110/120 volt | FIGURE 2. Battery Clips | |
| AC wall outlet to begin charging. |
|
|
4.When charging is complete and the FULL light is on, remove the charger and store in a safe place.
5