LG Electronics 47LY340C, 32LY340C, 42LY340C, 55LY340C owner manual Grounding, Moving, Ventilation

Page 4

4IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power

Short-circuit Supply

Breaker

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding (Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••Keep the product away from direct sunlight. ••Never touch this apparatus or antenna during

a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The plug must remain readily operable.

••Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Image 4
Contents LED TV Important Safety Instructions EnglishEnglish Moving GroundingVentilation Dot Defect Preventing image burn or burn-in on your TV screenGenerated Sound FCC Notice LG Recycling PolicyLicenses Open Source Software NoticeTable of Contents Unpacking Assembling and PreparingWall Mount Spacers Parts and Buttons Joystick ButtonAdjusting the menu Basic functionsLifting and Moving the TV Setting up the TV Attaching the StandSecuring the TV to a wall optional Cm 10 cmEnglish Connecting to an Antenna or Cable Making ConnectionsOther Connections Digital Audio SystemBlu-Ray / HD Cable Box / HD STB / DVD / PC Remote Control Maintenance Cleaning your TVTroubleshooting Specifications ModelsHdmi DTV supported mode Component supported modeIR Codes Code Function HexaRS-232C Setup Type of Connector D-Sub 9-Pin MaleWire ConfigurationsNot standard RS-232C ConfigurationsSet ID Command Reference List Communication ParametersError Acknowledgement Transmission / Receiving ProtocolTransmission OK AcknowledgementPower Command k a Volume Control Command k f To adjust volumeRemote Control Lock Mode Command k OSD Select Command k lBalance Command k t To adjust balance Auto Configuration Command j u Color Temperature Command x u To adjust color temperatureChannel Tuning Command m a Key Command m c Equalize Command j v To adjust equalizeTable List Channel Tuning StepPage Child Safety LG Customer Information Center