Kompernass TLG 1000 A1 Intended Use, Items supplied, Description of the appliance, Technical data

Page 4

ALL-PURPOSE BATTERY CHARGER

Intended Use

The All Purpose Battery Charger is intended exclusively for:

for the charging of rechargeable Ni Cd and Ni MH batteries with the sizes AAA/AA/C/D and 9 V block batteries to standard commercial rating capacities.

domestic use only, it is not intended for commer cial applications.

Items supplied

All Purpose Battery Charger

Operating manual

Description of the appliance

q Charging slots for 9 V Block batteries (Charging slots 5 and 6; see fold out side)

w Charging slots for AAA / AA / C / D batteries (Charging slots 1 to 4; see fold out side)

e LEDs (Operating status indicator)

Technical data

Input Voltage:

AC 100 240 V ~

 

60/50 Hz

Power consumption:

350 mA

Protection class:

II /

Operating temperature:

0°C 25°C

Storage temperature:

20°C 50°C

Output voltages:

 

 

 

 

 

 

6 x 1.4 V

 

 

 

 

 

(Charging slots 1 4)

 

2 x 9 V

 

 

 

 

 

 

 

 

(Charging slots 5 6)

Charging currents:

6 x 400 mA (Type AAA)

6 x 1000 mA (Type AA)

4 x 1000 mA (Types C or D)

2 x 70 mA (9 V Block battery)

Safety instructions

Fire hazard!

Do not place the Battery Charger:

where it would be subject to direct sunlight.

It could happen that the Battery Charger over heats and becomes irreparably damaged.

in close adjacency to sources of heat. This inclu des for example ovens, fan heaters and similar appliances, as well as the ventilation openings of electrical devices. The Battery Charger could be irreparably damaged.

in damp environments or in the vicinity of water. Moisture could permeate into the Battery Charger. There would then be the danger of receiving an electric shock and or causing a fire!

Only charge rechargable batteries of the types „Ni Cd“ and „Ni MH“. NEVER recharge batteries of other types or non rechargable batteries. These are not suitable for recharging. Batteries not suitable for recharging can overheat and explode. It could irreparably damage the Battery Charger and the inserted batteries. There is also a risk of personal injury!

- 2 -

Image 4
Contents All-Purpose Battery Charger TLG 1000 A1 TLG 1000 A1 Content Technical data Safety instructionsIntended Use Items suppliedInjury hazard Do not use damaged corroded batteriesBattery capacity lies under 80 % CommissioningCharging batteries Block batteries in the charging slots 5Calculating the average charging time Current time Min. =Troubleshooting CleaningDisposal Case of doubt, please contact your waste disposal centreWarranty & Service Importer Ring not carried out by our authorized serviceAny way by this warranty Your goods be assured