Kompernass KH 967 Keep to the charging time, Hrs, 3500 mAh, Not for 9V single block batteries

e) Keep to the charging time!

The best protection against battery overheating is not to exceed the proper charging time. If you wish to calculate

the time exactly, please refer to the technical data for information about the charging current required. You can take the values in the following table as a rough guide:

1.2V Ni-Cd battery	300 mAh	800 mAh	1800 mAh
Charging time:	2 hrs.	4 hrs.	10 hrs.
1.2V Ni-MH battery	2100 mAh	3500 mAh	4000 mAh
Charging time:	10 hrs.	18 hrs.	21 hrs.
9V Ni-Cd battery	100 mAh
Charging time:	11 hrs.
9V Ni-MH battery	200 mAh
Charging time:	22 hrs.

Warning: Batteries with a capacity of not more than 300 mAh should not be charged for more than 2 hours, as they would become overcharged and overheat.

Not for 9V single block batteries.

All charging slots and 9V connections have separate char- ging current controls. You can therefore charge completely

different batteries at the same time – provided you observe the different charging times, required for batteries with

different capacities.

f) Calculation of the Charging Time

Charging Time (h) = Battery Capacity (mAh) x 1.4 Charging Current of the Device (mA)

g) Charging time: Automatic cut-out

If you have loaded four batteries of the same type in the 1.2V charging slots, you can use the automatic cut-out feature. With this feature, the appliance switches the 1.2V

charging slots over to trickle charge after the pre-selected maximum charging time. This function is not available for the 9V connections.

7