Operation
Switching on
jPush the On / Off switch P upwards into position “1”.
Switching off
jPush the On / Off switch P downwards into position “0”.
LVacuum dust extraction
Warning! Danger of fire! There is the danger of fire when working with electrical devices that have a dustbox or can be connected to a vacuum cleaner. Under certain conditions the wood dust in the dust extraction bag (or in the vacuum‘s dust bag) may ignite, e.g. as a result of flying sparks generated when abrading metals or metal objects left in wood. This can happen particularly if the wood dust is mixed with paint residue or other chemicals and the abraded particles are hot from prolonged abrasion. Therefore you must empty the dust box and the vacuum cleaner’s dust bag before taking a break or stopping work and always avoid overheating of the abraded particles and the tool.
Wear a dust mask!
Adapter for internal vacuum extraction Connection:
jSlide the dust extraction box T on to the adapter port U until you hear it engage.
Removal:
jPress the release button R of the dust extraction box T and withdraw it towards the rear of the device.
jTap it on a robust object.
Adapter for external vacuum extractor Connection:
jPush the adapter for external vacuum extraction W into the adapter port U. If it is necessary to use the reducer piece E push the reducer piece into the adapter for external vacuum extraction W.
jSlide the hose of a suitable dust extraction de- vice approved for that purpose (e.g. a workshop vacuum cleaner) on to the adapter for external vacuum extraction W or the reducer piece E.
Removal:
jPull the hose of the dust extraction device off the adapter for external vacuum extraction W.
jPull off the adapter for external vacuum extraction W.
LAttaching / detaching sanding sheets
Attaching
jSanding sheets are easily attached to the backing plate O by means of the hook and pile fastening.
Detaching
jSimply pull the sanding sheet off the backing plate O (see Fig. C).
LRotating the backing plate
jSwitch off the tool.
jRotate the backing plate O into the desired position (see Fig. D).
LAdvice on use
jSwitch the tool on before placing it against the workpiece.
jApply light sanding pressure.
jAdvance the tool at an even rate.
jWork in parallel and overlapping widths.
Sanding and surfaces
The sanding output and the quality of the surface finish are determined by the grade of grit on the sanding sheet.
Tips and tricks
jChange sanding sheets at the appropriate time.
jAvoid sanding metal and other materials with the same sanding sheet.
8
UK / IE