Operation / Maintenance and cleaning / Disposal / Information
jSand difficult to reach places with the front or side corners of the backing plate O.
LMaintenance and cleaning
Attention: before starting any work on your sander, always pull the plug out of the mains socket.
jRemove any dirt from the tool, surfaces and other items in the working area immediately after you finish work.
jClean the safety filter Y of the dust extraction box T by pulling the safety filter out of the dust extraction box T. Suck out the debris carefully with a vacuum cleaner using a low suction pressure.
jClean the tool and remove any adhering dust with a narrow paint brush.
jNever any kind of sharp object or petrol, solvents or cleaning agents that might attack plastic. Do not allow any liquids to enter the inside of the tool.
jAlways keep the ventilation slots I clear.
LDisposal
The packaging consists entirely of envi-
Do not dispose of electric tools in the household waste!
In accordance with European Directive 2002 / 96 / EC about waste electrical and electronic equipment and its transposition into national legislation, worn out electric tools must be collected separately and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for more details of how to dispose of your eletric tools.
LInformation
LService
Details of the Service Centre responsible for your region are shown in the warranty documents.
LDeclaration of conformity / Producer 
We, Kompernaß GmbH, Burgstr. 21,
Machinery Directive (98 / 37 / EC)
Low voltage directive (73 / 23 / EEC)
Electromagnetic compatibility (89 / 336 / EEC)
Applicable harmonized standards
and confirm this with the CE symbol.
Type / Machine designation:
Palm detail sander XQ2
Bochum, 01.07.2006
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
UK / IE
9