LCleaning
LMaintenance and cleaning
Warning! Always make sure that the mains plug is out of the socket before doing any work on the device.
jWhen replacement becomes necessary the sup- plied spare carbon brushes (c) must be installed only by an authorised electrician.
jClean the sliding roller and the automatic blade guard R so that they move freely.
jDo not allow any liquids to enter the machine. Use a cloth or a thin brush to clean the housing. Remove dust / splinters by blowing with com- pressed air.
LDisposal
The packaging is made from environmentally- friendly material and can be disposed off at your local recycling plant.
Do not dispose of electrical tools with the household rubbish!
In accordance with European Directive 2002 / 96 / EC about waste electrical and electronic equipment and its transposition into national legislation, worn out electrical tools must be collected separately and taken for environmentally compatible recycling.
Cleaning / Disposal / Information
LManufacturers’ declaration of conformity 
We, Kompernaß GmbH, Burgstr. 21,
Machinery Directive: (98 / 37 / EC)
EC Low Voltage Directive (2006 / 95 / EEG) Electromagnetic compatibility: (89 / 336 / EEC)
Applicable harmonised standards:
Description of the product:
Chop and mitre saw PKGS 1450 LASER
Bochum, 31.07.2007
Please contact your local council office to find out about
disposal facilities for your
- Managing Director -
LInformation
LService
The service centre for your country is shown in the guarantee documentation.
We reserve the right to make technical modifications in the course of further development.
GB/IE
13