Panasonic SC-MAX670 owner manual Using a microphone, Using the auxiliary input

Page 14

Using a microphone

Preparation

Decrease the volume of the system to its minimum before you connect or disconnect a microphone.

1Connect a microphone (not supplied) to the microphone jack.

Plug type: ‰ 6.3 mm (1/4z) monaural

2Turn [MIC VOL, MIN/MAX] on the main unit to adjust the volume of the microphone.

3If you want to sing with the background music.

Play the music source and adjust the volume of the system.

Note:

•If a strange noise (howling) is emitted, move the microphone away from the speakers, or decrease the volume of the microphone.

•When you do not use the microphone, disconnect it from the microphone jack, and decrease the volume of the microphone level to “MIN”.

Using the auxiliary input

Preparation

•Disconnect the AC power supply cord.

•Switch off all equipment and read the appropriate operating instructions.

Note:

Components and cables are sold separately.

To connect a portable audio equipment etc.

You can play music from a portable audio equipment.

Preparation

Switch off the equalizer (if any) of the portable audio equipment to prevent sound distortion.

Decrease the volume of the system and the portable audio equipment before you connect or disconnect the portable audio equipment.

1Connect the portable audio equipment to AUX IN 2.

Plug type: ‰ 3.5 mm (1/8z) stereo (not supplied)

2Press [RADIO/EXT-IN] to select “AUX 2”.

3Play the portable audio equipment.

To connect a VCR, DVD player etc.

You can connect a VCR, DVD player etc. and listen to the audio through this system.

Rear panel of this main unit

DVD player (not supplied)

Audio cable

(not supplied)

1Connect the external equipment.

2Press [RADIO/EXT-IN] to select “AUX 1”.

3Play the external equipment.

Note:

•If you want to connect equipment other than those described, refer to the audio dealer.

•Sound distortion can occur when you use an adapter.

VQT5F35

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Table of contents CD Stereo SystemUnit Your system and the illustrations can look differentlySystem SC-MAX670 Main unit SA-MAX670 Speakers SB-MAX670 Conforms to UL STD Supplied accessoriesBattery Placement of speakers MaintenancePreparing the remote control Attaching the speaker feetConserving power Put the antenna where reception is best Tape not suppliedConnect the AC power supply cord Making the connectionsFront view Remote controlOverview of controls Select and enter buttons Standby/on switch Í, Í/ISwitch on the DJ function DJ function direct buttonsPlay menu DiscViewing available information Program playbackRadio One-Touch Connection Connecting by NFC BluetoothPairing a device Bluetooth standby modeDisconnecting a device Clock and timersLink mode Setting the clockSound and illumination Sleep timerAdjust the sound effect Illumination effectsDJ sampler DJ functionsDJ jukebox DJ effectsUsing a microphone Using the auxiliary inputTroubleshooting USBSystem memory reset initialization Remote control codeReference Software updateAbout Bluetooth LicensesSB-MAX670P SpecificationsSA-MAX670P As of April Limited WarrantyMail-InService--Online Repair Request Cómo realizar las conexiones DiscoRadio Bluetooth Funciones DJ Reloj y temporizadoresSonido e iluminación Español FCC Note If you see this symbolContains FCC ID ACJ-B21R1401 Reorient or relocate the receiving antenna
Top Page Image Contents