Charger Location and Connection
•The charger must be mounted inside. This device is not
•Do not operate charger in a
•Never place charger directly above battery being charged as gases from battery will corrode and damage charger.
•Never allow battery acid to drip on charger when reading specific gravity or filling battery.
•The battery charger should be connected to a grounded, metal, permanent wiring system.
•Connections to battery charger should comply with all local codes and ordinances.
•AC wiring should be run separately from the output of the charger and the alarm wiring. Use two runs of 12 gauge or heavier wire from the charger to the battery. Use 12 gauge or larger wire for input and ground connections.
NOTE: Follow all national and local wiring codes and best practices.
Section 75 | |
- 3 - |