TACKERS
COMMON FEATURES
For staples, nails, Metabo shaped wood claws (for fixing slot and spring boards) and groove clutches (for panels)
Electronically variably modifialbe impact force
Tappet with nut for specific placing of tacker on the positioning lung of the Metabo shaped wood claws and groove clutches Protection against unintentional triggering of blows
Ta E 2019
Ta E 3030 |
| Ta M 3034 |
Special advantages
Also suitable for handling flat wire staples
Reshaping feature (for staples and nails) Electronically controlled multiple impact device (for staples and nails). A depth probe automati- cally interrupts the multiple blow when the staple (the nail) is fully driven in.
Rubber protective shoe to be fitted on the tacker tappet. The protective shoe prevents the formation of pressure marks on the soft material while working with the tacker.
Comparative device characteristics
Tacker
Ta E 2019
Tacker | Tacker |
Ta E 3030 | Ta M 3034 |
Maximum pulse string For working with
-Staples, 4 mm wide
-Staples, 10 mm wide
-Flat wire stapl., 10 mm wide
-Nails
Weight (without mains cable)
Standard equipment
20 /min
12 - 18 mm
8 - 18 mm
8 - 14 mm
19mm
1 kg
Universal magazine for all
commercial staples and nails,
3 front plates
20/min
18 - 30 mm
16 - 30 mm
1,2 kg
Magazine for 4 mm wide (up to 30 mm long) staples and
20/min
18 - 30 mm
16 - 30 mm
1,2 kg
Magazine for 4 mm wide (up to 30 mm long) staples and
Type | Ta E 2019 |
Order no. | 6.02019 |
Ta E 3030 | Ta M 3034 |
6.03030 | 6.03034 |
214