Vanson V-6000 manual Before contacting a service center

Before contacting a service center

Please check the following

Symptom	Causes	Remedy
	- There is low battery capacity	- Insert fresh batteries
	- An AC Power Adapter is not	- Connect an AC Power Adapter
The camera doesn t	connected
switch on	- Batteries are inserted	- Insert the batteries according to the polarity
	incorrectly with the reverse	marks (+, -)
	polarities
	- The batteries are exhausted	- Insert fresh batteries
The camera power	- The Camera is turned off	- Slide the power switch to reactivate camera
	automatically
ceases whilst in use
	- The Adapter plug is not	- Remove and re-insert the plug
	connected securely
Batteries drain	- The Camera is being used in	- Keep the camera in warm conditions
	low temperatures	(i.e. inside a coat or jacket) and only remove it
quickly
		in order to take images
	- The memory card is not	- After turning the camera off, insert a new
	inserted	memory card
	- There is insufficient memory	- Delete unnecessary image files
	capacity
	- The memory card has not	- Format the memory card (p.81)
Camera does not	been formatted
take images when	- The memory card is exhausted	- Insert a new memory card
pressing the	- The camera’s power is off	- Turn the camera power on
Shutter button	- The batteries are exhausted	- Insert fresh batteries
	- The memory card is locked	- Refer to [CARD LOCKED!] error message
		(p.91)
	- Batteries are inserted	- Insert the batteries according to the polarity
	incorrectly with the reverse	marks (+, -)
	polarities
The camera	- The camera was stopped due	- Remove /re-insert batteries and switch the
suddenly stops
	to a malfunction	camera on
working while in use

92