Northern Industrial Tools BLACK NICKEL 1/4 AIR ANGLE DIE GRINDER

7.Check for misalignment or binding of moving parts, breakages of parts, damaged air hose (not included), and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Service

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance and Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury.

SPECIFIC SAFETY RULES

1.To avoid accidental injury, always wear ANSI-approved safety glasses, a full face shield, and hearing protection when operating the Die Grinder.

2.Use clean, dry, regulated compressed air at 90 PSI. Do not exceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.

3.When connecting to the air supply: Prior to each use, if an automatic oiler is not used, add two drops of air tool oil (not included) into the air inlet fitting of the Die Grinder.

4.Always disconnect the Die Grinder from its compressed air supply source, and squeeze the trigger to release all compressed air in the tool before performing any maintenance or service.

5.The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

ASSEMBLY AND OPERATING INSTRUCTIONS

To attach a quick connector

WARNING! Prior to performing any assembly and/or adjustment procedures, make sure the air supply hose (not included) is disconnected from the Die Grinder.

1.Prior to use, the Die Grinder requires the attachment of a quick-connector into its air inlet. To do so, wrap approximately 3" of pipe thread sealer tape (not included) around the male threads of a quick-connector. Then, firmly tighten the quick-connector into the air inlet.

Page: 4 of 7

BLACK NICKEL 1/4" AIR ANGLE DIE GRINDER specifications

The Northern Industrial Tools Black Nickel 1/4" Air Angle Die Grinder is a versatile and powerful tool designed for precision grinding, polishing, and finishing tasks in various applications. Built for both professional and DIY users, this air angle die grinder is engineered to handle tough jobs with ease and efficiency.

One of its main features is the 1/4" collet, which provides excellent compatibility with a wide array of grinding and cutting attachments. This allows users to easily switch tools depending on their specific needs, from sanding and polishing to burr removal and metal shaping. The 90-degree angle design enhances accessibility to tight spaces, making it ideal for intricate work and hard-to-reach areas that a straight die grinder might not be able to handle.

The Black Nickel coating not only adds to the aesthetic appeal of the die grinder but also offers a layer of protection against corrosion and wear. This durability is crucial for tools frequently exposed to metal shavings, dust, and other harsh environments. Additionally, the lightweight aluminum housing contributes to the tool's overall portability, ensuring comfortable handling over extended periods of use without causing fatigue.

Powered by an efficient air motor, the die grinder delivers high RPMs (revolutions per minute), providing substantial power for heavy-duty tasks while maintaining a smooth and controllable operation. Its ergonomic design features a comfortable grip, allowing for maximum maneuverability during prolonged sessions. The safety throttle lever prevents accidental startups and ensures that the tool remains under the user's control at all times.

For enhanced performance, the Northern Industrial Tools Black Nickel 1/4" Air Angle Die Grinder is designed for easy maintenance. Its access to the internal components allows for quick lubrication and servicing, ensuring consistent operation over time. Users benefit from reduced downtime and increased productivity, making it a valuable addition to any workshop or job site.

In summary, the Northern Industrial Tools Black Nickel 1/4" Air Angle Die Grinder is a reliable and efficient tool that delivers exceptional performance for a range of applications. With its durable construction, versatile features, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve high-quality results in their grinding and finishing tasks.