IBM DJ800 user manual Power On Switch, Speaker Connector, Power LED Connector

Components and Jumper Setting

D J 8 0 0 M o t h e r b o a r d

ACPI LED

ACPI function allows the system to enter or resume from the Sus- pend mode. If your system chassis does not have this button, the same function may be performed from your OS; if it is supported.

Power On Switch

This switch connects to the system’s Power button allowing you to power on and off the system. You can configure the system to use the keyboard or mouse to power-on the system. You can also configure the system to respond to power restoration after a power outage occurs. These functions can be configured by making appropriate settings in the Integrated Peripherals submenu (“Super IO Device” field) of the BIOS.

Speaker Connector

This connects to the PC speaker installed in the system chassis.

Power LED Connector

This connector connects to the system’s Power LED. When the system’s power is on, this LED will light.

2-9