IBM DJ800 user manual CPU/ System Fan Connectors, pin Fan Connector Sensor +12V GND

Models: DJ800

1 56
Download 56 pages 10.45 Kb
Page 29
Image 29
CPU/ System Fan Connectors

Chapter 2

CPU/ System Fan Connectors

There are five 3-pin fan connectors in the Mainboard. Two fans are used for CPU1 and CPU2; three fans are for system and front. These connectors support cooling fans of 500mA (6W) or less. Depending on the fan manufacturer, the wiring and plug may be different. Connect the fan’s plug to the Mainboard with respect to the polarity of the fan connector.

3-pin Fan Connector

Sensor +12V GND

WARNING

The CPU and/or motherboard will overheat if there is not enough airflow across the CPU and onboard heatsink. Damage may occur to the motherboard and/or the CPU fan if these pins are incorrectly used. These are NOT jumpers; DO NOT place jumper caps over these pins.

2-16

Page 29
Image 29
IBM DJ800 user manual CPU/ System Fan Connectors, pin Fan Connector Sensor +12V GND